Add System icon Adding a remote system

Note: This action is not supported when using the following:

Use this action to connect to a system and retrieve the system information.

Tip: Before adding a remote system, verify that the Adaptec Storage Manager is running on the remote system. If the Adaptec Storage Manager is not running on the remote system, you will receive an error.

  1. From the Remote menu, select Remote Add or click (Add) on the toolbar. The "Add remote system" window opens.

  2. Type the remote host name or TCP/IP address.

  3. Type the Remote system startup port number. The default port number is 34571.

  4. If security is enabled on the remote system, type your user name and password.

    Note: For a remote Windows or Linux system, you must enter a valid network user name and password for the operating system. The password is case sensitive.

    If security is disabled, go to step 6. (Security is enabled by default.)

  5. If you want to save the user name and password, select the Save user name/Password box. Once you successfully connect to the remote system, the Adaptec Storage Manager stores this information in a file along with the host name so you do not have to type your user name and password every time you run the Adaptec Storage Manager.

  6. Click Connect.

More information


Glossary | Contents

 

x-0300-ASM-00-02-EN