ZIP NAME: ml150_lan_sco_ou8-v7.2.10.zip TITLE: SCO Open Unix 8 Lan driver for ProLiant ML150. VERSION: V7.2.10 LANGUAGE(S): English PRODUCTS AFFECTED: ProLiant ML150 Servers OPERATING SYSTEM: SCO Open Unix 8 EFFECTIVE DATE: November 20, 2003 SUPERSEDES: None (it is the Initial release for ML150) DESCRIPTION: This .ZIP file contains the Lan driver for ProLiant ML150 servers running SCO Open Unix 8. NEW FEATURES: None. PROBLEMS FIXED: -None. HOW TO USE: 1. Download this .ZIP file on your PC windows system. 2. Unzip the contents to a directory on your hard drive. 3. From that drive and directory, copy the file "e1008g.pkg" to a floppy disc. 4. Make sure that no other users log on the SCO Open Unix system, and all user applications are closed. 5. Copy the e1008g.pkg file to any directory, like /tmp, on the SCO Open Unix system, # mount /dev/fd0 /mnt # cp /mnt/e1008g.pkg /tmp 6. If there is an older version of the e1008g driver on the system (to find out the driver version, type pkginfo -l e1008g): a. Run netcfg and remove any configured NICs. b. Exit netcfg. c. Remove the old driver by typing pkgrm e1008g. 7. Install the new driver using pkgadd. # pkgadd -d /tmp/e1008g.pkg Press the Enter key, and then press the Y key then the Enter key to confirm the installation. 8. Run netcfg to add and configure the NICs. a. On the pop-up window, click Hardware > Add new LAN adapter. b. Select Ethernet-Intel(R) PRO/1000 MT Network Connection (DDI 8)(7.2.10)-PCI Slot 0 Bus 4 Device 1 Function 0. c. Click Continue > OK d. On the Add protocol window, click Add. e. Enter your network settings and click OK. f. On the Configure networking product window, click OK. g. Click Hardware > Exit to exit netcfg. 9. Type shutdown ¡Vy now and press the Enter key to reboot the system. Copyright 2003, Hewlett-Packard Company. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies