ZIP NAME:  ml150_lan_sco_os507-v1.2.10.zip
TITLE:  SCO Open Server 5.07 Lan driver for ProLiant ML150.

VERSION:  V1.2.10

LANGUAGE(S):  English

PRODUCTS AFFECTED:   ProLiant ML150 Servers

OPERATING SYSTEM:  SCO Open Server 5.07

EFFECTIVE DATE:  November 20, 2003

SUPERSEDES:  None (it is the Initial release for ML150)

DESCRIPTION:  This .ZIP file contains the Lan driver for ProLiant ML150 servers running SCO Open Server 5.07.

NEW FEATURES:  None.

PROBLEMS FIXED:  
  -None.

HOW TO USE:

1.  Download this .ZIP file on your windows PC system.

2.  Unzip the contents to a directory on your hard drive.

3.  From that drive and directory, copy the file "eeG.vol" to a floppy disc.

4.  Make sure that no other users log on the SCO Open Server system, and all user applications are closed.

5.  Copy the eeG.vol file to any directory, like /tmp, on the SCO Open Server system, 
    and then rename the file as VOL.000.000. Use the chmod command to make it a read-only file.
    # mount /dev/fd0 /mnt
    # cp /mnt/eeG.vol /tmp/VOL.000.000
    # chmod 444 /tmp/VOL.000.000

6.  If there is an older version of the eeG driver on the system, you must first remove it:
    a. Run netconfig. 
    b. Remove all drivers of the ¡§Intel PRO/1000...¡¨ adapter(s). 
    c. Exit netconfig and select not to relink the kernel.
    d. Run Custom and remove the previous version of the Intel(R) PRO/1000 Network drivers.

7.  To install the new driver:
    a. Run custom.
    b. On the pop-up window, click Software > Install New.
    c. Select From scosysv and click Continue. 
    d. Select Media Images for the installation media, and click Continue. 
    e. Type the directory path to the VOL.000.000 file.
       For example, if you copied the file to /tmp in step 3, type /tmp.
       Click OK.
    f. Click Install to start the installation. 
    g. After the installation is complete, click OK, and then exit custom.

8.  To add the adapters:
    a. Run netconfig.
    b. Click Hardware > Add new LAN adapter, and click Continue.
    c. Select SCO TCP/IP and click Add to enter the SCO TCP/IP Configuration.
    d. Enter the information and click OK. 
       By default, the driver automatically detects the line speed and duplex mode. 
       If you want to modify any of these settings, select Advanced Options and set the speed and duplex modes. 
    e. Click OK on the Configure Networking product window.
    f. Exit netconfig and.
    g. Click Yes to re-link the kernel. 
       You need to press the Y key and then the Enter key to confirm. 
       Then press the Y key and then the Enter key again to re-build the kernel environment.
    h. Press the Enter key to continue.

9.  Type reboot to reboot the system.


Copyright 2003, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies