FILE NAME:  ml110g3winscsiraid-4.1.0.7251-1.zip 

TITLE :  Adaptec SCSI RAID 2120S Controller Windows Driver for HP Proliant ML110 G3 Server.

DESCRIPTION:  This .ZIP file contains drivers for Adaptec SCSI RAID 2120S Controller.

CATEGORY:  Driver - Storage Controller

VERSION:  4.10.7251      

SUPPORTED LANGUAGE(S):  English

SUPPORTED HARDWARE:   HP ProLiant ML110 G3 Server.

SUPPORTED OPERATING SYSTEM:  Microsoft Windows Server 2003(32 Bit), Microsoft Windows Server 2003(64 Bit), Microsoft Windows Server SBS.

EXPECTED RELEASE DATE:  15 Aug 2005

PUBLIC NOTES:

FIXES AND/OR ENHANCEMENTS: 
Initial Release. 

PREREQUISITES: 

INSTALLATION INSTRUCTIONS:
To install the driver after installing the operating system: 
1. Unzip the files and copy the contents of the unzipped files to the local drive.

2. Open Device Manager, SCSI Controllers. 

3. Right click on the Adaptec Controller and select properties. 

4. Select the driver tab, and click on the Driver Update button. 

5. Check the local drive option, and then click on the OK button. 

6. Proceed with the installation wizard, followed by rebooting the system. 


To install the driver while installing the operating system: 
1. Follow the operating system instructions to start the Microsoft® Windows® 2000 and Windows Server 2003 installation. 

2. When prompted, press the F6 key. If the F6 key is not pressed during the brief interval when the prompt is displayed, the installation must be restarted.

3. A blue screen is displayed with the following message: 

S=Specify Additional Device 
ENTER=Continue 
F3=Exit

4. Press the [S] key. If a menu is displayed, use the arrow keys to scroll to Other and press the Enter key. When prompted to insert the manufacturer-supplied diskette, insert the Windows 2000 or Window Server 2003 USB disk and press the Enter key. 
NOTE: To create a driver disk, extract the contents of zipped files to the USB disk. 

5. Select the "Adaptec SCSI Controller" and press the Enter key. The screen for specifying additional drivers is displayed again. If you do not have any additional drivers to install, press the Enter key. 

6. Follow the on-screen instructions to complete the installation. 
IMPORTANT: Do not remove the USB disk from the drive until instructed to do so.

7. Reboot the server.