FILE NAME:  ml110g2bios-1.1.0-2 zip

TITLE :  HP Proliant ML110 G2 BIOS

DESCRIPTION:  This .ZIP file contains BIOS for ProLiant ML110 G2 Server.

CATEGORY:  Firmware - Bios

VERSION:  1.10

SUPPORTED LANGUAGE(S):  English

SUPPORTED HARDWARE:   HP ProLiant ML110 G2 Server

SUPPORTED OPERATING SYSTEM:  All

EXPECTED RELEASE DATE:  May 5, 2005

PUBLIC NOTES:

FIXES OR ENHANCEMENTS:
Version 1.10
-----------------------------------
-Fixes/Update:
	1.Remove the solution that BIOS would update DMI type 1 Serial Number and UUID to ESCD during POST automatically. And phase-in the utility WDMI.EXE to replace the Phoenix Utility PHLASH16.EXE to update DMI type 1 Serial Number to support HP flash utility ROMPAQ.
	2.Fixed the BIOS would enable BMC USI function automatically while BIOS select Console Redirection over BMC COM port.
	3.Add wait time on logo displayed.
	4.Fixed F8 and F12 hotkey message could not display on diagnostic screen.
	5.BIOS would establish UUID by DMI type 1 Product ID and Serial Number on first boot.
	6.Modify Serial Number information displayed on summary screen issue.
	7.Set PCI-E slot number to 4.

PREREQUISITES: 

INSTALLATION INSTRUCTIONS:

1.  Download this .ZIP file to your server.

2.  Unzip the contents to a directory on your hard drive.

3.  Insert a formatted 1.44 FDD.

4.  From that drive and directory, execute the file ml110g2bios-1.09.EXE.

5.  Follow the prompts as needed.

6.  Restart the computer and boot it from the FDD.

7.  New BIOS will be flashed automatically.


Copyright 2004, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies