SOFTPAQ NUMBER: N/A

PART NUMBER: N/A

FILE NAME: lsi_sas.sys-1.21.3.0.Win2K3.x86.zip

TITLE: HP 4/8 Internal Port SAS HBA with RAID Driver Diskette for Windows Server 2003

VERSION: 1.21.3.0

KEY FILE: 

LANGUAGE: English

CATEGORY: Software - Driver Diskettes

DIVISION: N/A

OPERATING SYSTEM: Windows Server 2003

PREREQUISITES: N/A

EFFECTIVE DATE: October 04, 2005

ELECTRONIC DISTRIBUTION ALLOWED: YES

SOFTPAQ UTILITY VERSION: N/A

SUPERSEDES: N/A

SUPPORT SYSTEMS/DEVICES:
  BL35p SAS Model

DESCRIPTION:
~~~~~~~~~~~~
This driver provides support for the HP 4/8 Internal Port SAS HBA with RAID.

FIXES:
~~~~~~

KNOWN ISSUES:
~~~~~~~~~~~~~

ENHANCEMENTS:
~~~~~~~~~~~~~
1. Initial Release

INSTALLATION
~~~~~~~~~~~~
Installing the Driver in a New Windows System
--------------------------------------------- 
In this scenario, you are installing the driver in a new system that has no operating system. To install the driver: 

1. Create a driver disk by copying the contents of lsi_sas.sys-1.21.3.0.Win2K3.x86.zip to a floppy diskette. 
2. During power-up POST initialization press F8 If you need to  create a RAID array when prompted to enter the LSI BIOS Setup utility. 
3. During the Windows install setup dialog box Press F6 when prompted to install a third-party driver. 

Note: When F6 is active, a prompt appears at the bottom of the screen. Press F6 immediately-you only have 5 seconds. If you miss your chance, restart this Windows installation to complete it correctly. Otherwise, Windows will not recognize your controller. 

4. Insert the driver disk you created in Step 1 and wait until prompted to install a driver. 
5. Press S to specify that the driver is on the floppy disk, then press Enter. 
6. When the LSI Logic Fusion-MPT SAS 1068 (or LSI Logic Fusion-MPT SAS 1064 for the BL35p) driver is found, press Enter. Follow the remaining on-screen instructions to complete your installation.

Installing the Driver in an Existing Windows System 
---------------------------------------------------
In this scenario, you are installing a driver in a system that already has a Windows operating system. This system is expected to be booting from a controller other than the HP 4/8 Internal Port SAS HBA with RAID (i.e. a SCSI controller). 

1. Create a driver disk by exracting the contents of lsi_sas.sys-1.21.3.0.Win2K3.x86.zip to a floppy diskette. 
2. Start Windows. Windows launches the Found New Hardware Wizard, which searches for the controller driver. 
3. Insert the driver disk you created in Step 1, select the floppy disk drive as the source then click Next. 
4. If necessary, select the appropriate driver for your operating system. 
5. Click Next as needed to complete the controller installation. 
6. Remove the driver disk. 
7. If prompted, restart the computer. 
8. After the driver installed, you can create an array with BIOS by reboot the system, press F8 when prompted to enter the BIOS Setup utility. 

Customer Service
---------------------------------------------------
For support, please send email to contact.hp@hp.com

Copyright 2005, Hewlett_Packard Development Company, L.P. Product names mentioned heren may be trademarks and/or registered trademarks of their respective companies.