ZIP NAME: dl140bcm5700ul10-6.2.17-1.zip TITLE: United Linux 1.0/SLES 8 bcm57xx nic Driver for the HP ProLiant DL140. VERSION: 6.2.17-1 LANGUAGE(S): English PRODUCTS AFFECTED: HP ProLiant DL140 Servers OPERATING SYSTEMS: United Linux 1.0/SLES 8 EFFECTIVE DATE: October 17, 2003 SUPERSEDES: None. DESCRIPTION: This .ZIP file contains driver for bcm57xx nic support for the HP ProLiant DL140 servers running United Linux 1.0 or SLES 8. NEW FEATURES: None. PROBLEMS FIXED: None. HOW TO USE: 1. Download this .ZIP file on your server. 2. Unzip the contents to a directory on your hard drive. 3. You should confirm the kernel-source is installed in your United Linux 1.0/SLES 8 system. 4. Prepare kernel source tree: Prepare the kernel source tree. These steps are necessary in order to compile a driver that will match your running kernel: cd /usr/src/linux make cloneconfig make dep 5. Stop the current driver by typing the following command(s): ifdown eth0 ifdown eth1 6. Remove the current module from the running kernel: rmmod bcm5700 7. Install bcm5700 source package as shown below, [root@localhost]# rpm -ivh bcm5700.src.rpm bcm5700 ########################################### 8. Enter the source tree, [root@localhost]# cd /usr/src/packages/ 9. Compile driver source to binary code [root@localhost]# rpm -bb SPECS/bcm5700.spec ... ... ... ... 10. Install the driver to the corresponding directory, Note that the --force option is needed. [root@localhost]# cd /usr/src/packages/RPMS/i386 [root@localhost]# rpm -ivh --force bcm5700-6.2.17-1.i386.rpm bcm5700 ########################################### 11. To load the NIC driver into the running kernel, type the following command: insmod bcm5700 12. The bcm5700 driver will start after you run the following command: ifup eth0 ifup eth1 Copyright 2003, Broadcom Cporporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies