System BIOS for ProLiant ML150
version 1.13A (20 May 04)

Resolved the following:
* Issue where Redia test fails with 3Com 3C996B-T NIC in slot 3 and 5 under Windows 2000 server and 
  Windows Server 2003. 
* Issue where Redia test fails with Intel PRO/1000 MT serve NIC in PCI slot 5 under turbolinux 
  server 8.
* Issue where Radia test fails with 3Com 3C996B-T NIC in the PCI slot 5 under SCO OpenServer 5.0.7.

Added the following:
* Upgrade CPU modules 
* Change BBS configutation from 2 to 0.
* Enable spread spectrum.
* Set Prefetch Flush Enable bit
* Add Intel CPU 0F25H ucode M01F2514
* Set Intel Xeon L3 cache DMI info size to be 400

English(US)(ml150_bios_all_os-v1.13zip -620KB)

Installation
	Download this .ZIP file on your server.

	Unzip the contents to a directory on your hard drive.

	From that drive and directory, execute the file BIOS_V[version].EXE

	Prepare a blank and formatted 3"1/2 disk. Insert the disk in your floppy drive.

	Press Enter, it will create the HP ProLiant ML150 BIOS Update diskette.

	Boot the server with the BIOS Update diskette in the floppy drive: it will automatically 
	flash the BIOS from the diskette and reboot the server. <Don't remove the diskette from 
	floppy drive>
	
	Boot server with this diskette again after flashed BIOS and completed settings on BIOS 
	SETUP menuitem, then serial number of system will be restored to NVRAM and DMI of BIOS by 	this diskette.

	Remove the diskette from the floppy drive.

	Reboot the server.

systems supported 
family : ProLiant ML150 (limited availability Asia Pacific and Europe)
models : All Models