SOFTPAQ NUMBER: N/A

PART NUMBER: N/A

FILE NAME: HP6-port_SATA_RAID_Controller_Driver_for_Windows_v4.2.1.7365.zip

TITLE: HP 6-Port SATA RAID Controller Driver for Windows 2000/Server 2003 

VERSION: 4.2.1.7365

LANGUAGE: English

CATEGORY: Driver Diskettes

DIVISION: N/A


OPERATING SYSTEM: Windows 2000, Windows Server 2003

PREREQUISITES: N/A

EFFECTIVE DATE: March 23, 2005

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: N/A

SUPERSEDES: N/A

SUPPORTED Systems/Devices
  ProLiant ML110 G2
  ProLiant ML150 G2
  ProLiant ML310 G2
  ProLiant ML350 G4p

  HP 6-Port SATA RAID Controller

DESCRIPTION:

This driver provides support for HP 6-Port SATA RAID Controller on Windows 2000/Windows Server 2003.


FIXES
~~~~~


KNOWN ISSUES:
   - None

ENHANCEMENTS
~~~~~~~~~~~~
1) Added support for the ML310 G2 & ML350 G4p


Installation
Installing the Driver in a New Windows System 
In this scenario, you are installing the driver in a new system that has no operating system. To install the driver: 

Create a driver disk by copying the contents of HP6-port_SATA_RAID_Controller_Driver_for_Windows_v4.2.1.7365.zip to a floppy diskette. 

If creating an array, press Ctrl+A when prompted to enter the BIOS Setup utility. 

Press F6 when prompted to install a third-party driver. 

Note: When F6 is active, a prompt appears at the bottom of the screen. Press F6 immediately—you only have 5 seconds. If you miss your chance, restart this Windows installation to complete it correctly. Otherwise, Windows will not recognize your controller. 

Insert the driver disk you created in Step 1 and wait until prompted to install a driver. 

Press S to specify that the driver is on the floppy disk, then press Enter. 

When the Adaptec 2610SA driver is found, press Enter. Follow the remaining on-screen instructions to complete your installation.

Installing the Driver in an Existing Windows System 
In this scenario, you are installing a driver in a system that already has a Windows operating system. To install the driver: 

Create a driver disk by exracting the contents of HP6-port_SATA_RAID_Controller_Driver_for_Windows_v4.2.1.7365.zip to a floppy diskette. 

Start Windows. Windows launches the Found New Hardware Wizard, which searches for the controller driver. 

Insert the driver disk you created in Step 1, select the floppy disk drive as the source then click Next. 

If necessary, select the appropriate driver for your operating system. 

Click Next as needed to complete the controller installation. 

Remove the driver disk. 

If prompted, restart the computer.



Customer Service
-------------------------
For support, please send email to contact.hp@hp.com

Copyright 2005, Hewlett-Packard Development Company, L.P. Product names mentioned heren may be trademarks and/or registered trademarks of their respective companies.