(1) These webpages should be modified to add a new link under "Infrastructure Firmware":
	
http://www.compaq.com/support/files/server/us/locate/20_3981.html  (Win2000)

http://www.compaq.com/support/files/server/us/locate/86_3981.html  (Redhat 7.3)

http://www.compaq.com/support/files/server/us/locate/72_3981.html  (SuSe 7)

	Note that the "Infrastructure Firmware" section will have to be created.

(2) The new link should be titled: 
	"Compaq Proliant BL p-Class GbE Interconnect Switch Firmware".

(3) The "current version" link name should be "1.1.2" and link to a 
	new page with the info below (very similar to:
	http://www.compaq.com/support/files/server/us/download/14882.html)




SOFTWARE & DRIVERS  

 

 
Compaq Proliant BL p-Class GbE Interconnect Switch Firmware
Version 1.1.2   (posting date)
 
 Revision History  

 

 
 English (US) (pgbe112.bin - 1.2 MB)   

 
This softpaq contains the firmware image file for the Compaq Proliant BL 
p-Class GbE Interconnect Switch.
 

 
 SOFTWARE INFORMATION  

 
Enhancements


Initial version.  


 
Installation  

 

 
Place the firmware image file (pGbE112.bin) on a TFTP server that is network-accessible from the switch you wish to update. Use the switch webpage or the switch management utility (cpqswcfg) to update the firmware.  

 
Alternately, the switch's serial console may be used to update the firmware. In this case, place the image file on the server attached to the switch's serial port, and login to the serial console to perform the update.  

 
The switch will reboot upon successful completion of the firmware update.  

 
 SYSTEMS SUPPORTED  

 
 
Family  Models  
ProLiant BL20p  All Models