[SunHELP] XVR-1000 in a Blade 1000

[listmail]

looking at last section of 
http://dlc.sun.com/pdf/816-1330-11/816-1330-11.pdf , maybe via eeprom, 
create a devalias for /devices/upa at 8,480000/SUNW,gfb at 0,0:gfb0 and set 
output-device=<device_alias> ?
> Hi
>
> I've got a problem with an XVR-1000 in a Blade 1000~ ( running Solaris 10).
>
> I've replaced an Expert3D with the XVR-1000.  I don't get any display, either OpenBoot or windowing system, but the system boots fine - I can SSH in or log into the connected Sun Ray.
>
> 'fbconfig' sees the card and the monitors attached to it (one on the 13w3 and one on the DVI).  I tried installing the driver (downloaded from Sun's site), but it said "This machine is running Solaris 10, which is not supported".
>
> '/dev/fb' points to '/devices/upa at 8,480000/SUNW,gfb at 0,0:gfb0', and 'output-device=screen'. I've tried setting the card back to factory defaults ('fbconfig -default -dev gfb0').
>
> Can anyone suggest what to try next?
>
>
> Thanks in advance,
> Geoff
>
>
> _________________________________________________________________
>
> Hotmail, Messenger, Photos  and more - all with the new Windows Live. Get started! 
> http://www.download.live.com/
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp