[SunHELP] Solaris 9 & qlogic drivers

[Monique Marais]

Hi Martin,

You're right.  There is an onboard qlogic, and a driver in place.  I'm a bit
hesitant to remove this driver because of the onboard.  The EME
documentation is convinced that I can use Qlogic drivers with a sun
re-branded card.  However, I'm starting to disagree with this.

Regards,

Monique

-----Original Message-----
From: Martin Frost [mailto:martin at omniconsumerproducts.com] 
Sent: 05 July 2006 01:04 PM
To: The SunHELP List
Subject: Re: [SunHELP] Solaris 9 & qlogic drivers

On Wed, 5 Jul 2006, Monique Marais wrote:

> 1. I could see the hba's after probe-scsi-all
> /pci at 8,600000/SUNW,qlc at 2
> Fibre Channel link down
> 
> (But its my understanding that the device path should be: /QLGC, qla at 2)

It looks like maybe your cards are using a Sun OBP driver rather than a
QLogic one, hence SUNW rather than QLGC in the OBP path.

Possibly you should be following a different set of instructions, for a
Sun version of the card.

This could be an OBP version issue, I guess.

Note: I have no direct experience of these cards - these are just
conjectures that may be helpful.

Martin
_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp