[SunHELP] RSM 214 sparc storage array on sparcstation 4/5

[Phil Stracchino]

Douglas Cox wrote:
> For example, with the cable disconnected from the rsm 214 I get the 
> following:
> 
> ok probe-scsi-all
> /iommu at 0,10000000/sbus at 0,10001000/espdma at 4,8400000/esp at 4,88000
> Target 3
> DCAS32160SUN2.1GS65A97326B6934
> 0933 00011673H7732
> E60259
> 
> However, with the cable connected I get only the following:
> 
> ok probe-scsi-all
> /iommu at 0,10000000/sbus at 0,10001000/espdma at 4,8400000/esp at 4,88000

> Right now the DLY pin is bridged by a jumper, the remaining pins are 
> unbridged.  From my internet research I understand that the scsi ids within 
> the rsm are geographical, and will be 0-6 unless the ID3 jumper is set, in 
> which case ids 7-15 will be available.  The drives are jumpered as follows 
> (1 represents a bridge across the pins):

Since you're connecting to a machine that already has a drive at ID3,
have you tried setting the ID3 jumper?  It's the first thing I'd try
given this situation.



-- 
 Phil Stracchino                     Landline: 603-886-3518
 phil.stracchino at speakeasy.net         Mobile: 603-216-7037
 Renaissance Man, Unix generalist, Perl hacker, Free Stater