[SunHELP] break sent during connection to SC

Predrag Zecevic - Solaris System Administrator predrag.zecevic at 2e-systems.com
Thu Jun 9 03:21:34 CDT 2005


Hi,

Break=STOP-a (correct).

You can prevent sending break to box when you shutdown your PC with 
uncommenting line:

KEYBOARD_ABORT=alternate

in /etc/default/kbd file

Hope this helps ... ;-)


listmail at triad.rr.com wrote:

>ok thanks for the tip.  Now this "send break signal" is the equivalent 
>of what Stop-A does correct?  meaning the OS is halted for the time 
>being?
>
>----- Original Message -----
>From: Dieter Montanez <dietermontanez at bellsouth.net>
>Date: Wednesday, June 8, 2005 3:59 pm
>Subject: Re: [SunHELP] break sent during connection to SC
>
>  
>
>>use "go" instead of "resume" to get out of the ok prompt.
>>
>>Sometimes when you reboot a PC it will generate break
>>signal and if it is connected to the console port ... bang
>>
>>dieter
>>
>>
>>-----Original Message-----
>>From: sunhelp-bounces at sunhelp.org [mailto:sunhelp-
>>bounces at sunhelp.org]OnBehalf Of listmail at triad.rr.com
>>Sent: Wednesday, June 08, 2005 12:27 PM
>>To: sunhelp at sunhelp.org
>>Subject: [SunHELP] break sent during connection to SC
>>
>>
>>I connected to an V880 SC this morning through the serial port. It 
>>was 
>>already stupid that I chose to use hyperterm since you can't 
>>manually 
>>send a break, but somehow it sent a break anyway.  Either through 
>>having connected a cable or perhaps settings I chose which were 
>>9600,N,8,1.  Is there any explanation behind this?   I suppose 
>>setting 
>>the keyswitch to lock should prevent this in the future, but I 
>>flipped 
>>out to see our production box sitting at the ok prompt...  I 
>>tried "resume" but was getting FAST MMU miss so I had to reboot 
>>the 
>>box.  Thanks for any info.
>>
>>FYI I've caught wind of TERATERM and i'm going to check that out, 
>>but I'
>>m still wary of connecting up through the serial port if a break 
>>is 
>>going to be sent and thus interrupt operations.  All I really need 
>>to 
>>do is dump the config and get the IP address that was originally 
>>configured in the SC for administrative telnet connections.
>>_______________________________________________
>>SunHELP maillist  -  SunHELP at sunhelp.org
>>http://www.sunhelp.org/mailman/listinfo/sunhelp
>>_______________________________________________
>>SunHELP maillist  -  SunHELP at sunhelp.org
>>http://www.sunhelp.org/mailman/listinfo/sunhelp
>>
>>    
>>
>_______________________________________________
>SunHELP maillist  -  SunHELP at sunhelp.org
>http://www.sunhelp.org/mailman/listinfo/sunhelp
>  
>

-- 
| Predrag Zecevic | e-Mail: Predrag.Zecevic at 2e-Systems.COM |
| 2e Systems GmbH |              Tel: (+49)[0]6107 989 415 |
|Im Taubengrund 12|              Fax: (+49)[0]6107 989 494 |
|65451 Kelsterbach|                                        |
|     Germany     |         Cellular: (+49)[0]174 3109 288 |
+=================+
Science is what happens when preconception meets verification.



More information about the SunHELP mailing list