[SunHELP] (no subject)
mangesh.vengsarkar at tcs.com
mangesh.vengsarkar at tcs.com
Wed Nov 17 01:24:36 CST 2004
Hi All,
All gurus on this list ...I'm facing some issues with my disks & EMC...Pls
give a solution to below mentioned errors, which i get in my messages
file....
ERRORS
Nov 16 20:51:08 scsi: [ID 365881 kern.info] Vendor 'EMC', product
'SYMMETRIX', 13440 512 byte blocks
Nov 16 20:51:08 scsi: [ID 107833 kern.warning] WARNING:
/pci at 9,700000/QLGC,qla at 2/sd at 0,d0 (sd4960):
Nov 16 20:51:08 corrupt label - wrong magic number
--------------------------------------------------------------------------
Nov 16 21:52:23 vxfs: [ID 214594 kern.info] vxfs msgcnt 130 offset
0x000000d0 0 0
Nov 16 21:52:23 vxfs: [ID 702911 kern.warning] WARNING: msgcnt 142 mesg
017: V-2-17: vx_inactive_tran - /oracle file
system inode 153022 marked bad incore
--------------------------------------------------------------------------------------
Below given errors are occuring during a BCV backup on EMC storage. This
is coming continously for last 2-3 days. It is showing the fs is not clean
& wants to repair it. When i put "y" then it takes yes for all it's
queries corrects the fs & comes out after fixing it. The main problem is
that it is coming continously for 2-3 days. If everyday i give "y" then
probably the FS would get corrupted & may be i'll lose some data in that.
Please help me to set it right. OR pls let me know if i'm going wrong
anywhere.
*****************Importing BCV Disk Group at 12:14:39-16-11-2004******
*****************Starting BCV Volumes at 12:16:58-16-11-2004************
**************Mounting BCV Volumes at 12:16:59-16-11-2004***************
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
fileset 999 primary-ilist inode 102458 has invalid number of blocks
(53279)
fileset 999 primary-ilist inode 102458 failed validation clear? (ynq)y
fileset 999 primary-ilist inode 103118 dup block
extent start 332236 offset 0 continue? (ynq)y
fileset 999 primary-ilist inode 103118 dup/bad blocks found clear? (ynq)y
fileset 999 primary-ilist inode 104268 has invalid number of blocks (24)
fileset 999 primary-ilist inode 104268 failed validation clear? (ynq)y
pass1b - checking for more dup blocks
fileset 999 primary-ilist inode 101283 dup block
extent start 332236 offset 0 continue? (ynq)y
fileset 999 primary-ilist inode 101283 dup/bad blocks found clear? (ynq)y
rebuild structural files? (ynq)y
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
fileset 999 directory 63 block 1365097 offset 132 references free inode
ino 103118 remove entry? (ynq)y
fileset 999 directory 63 block 1365097 incorrect header fix? (ynq)y
fileset 999 directory 24835 block 5428312 offset 132 references free inode
ino 104268 remove entry? (ynq)y
fileset 999 directory 24835 block 5428312 incorrect header fix? (ynq)y
fileset 999 directory 25218 block 5424403 offset 428 references free inode
ino 101283 remove entry? (ynq)y
fileset 999 directory 25218 block 5424403 offset 600 references free inode
ino 104246 remove entry? (ynq)y
fileset 999 directory 25218 block 5424403 incorrect header fix? (ynq)y
fileset 999 directory 94492 block 1088199 offset 320 references free inode
ino 102458 remove entry? (ynq)y
fileset 999 directory 94492 block 1088199 incorrect header fix? (ynq)y
pass3 - checking reference counts
fileset 999 primary-ilist inode 103537 unreferenced file, reconnect?
(ynq)y
fileset 999 primary-ilist inode 104596 unreferenced file, reconnect?
(ynq)y
pass4 - checking resource maps
fileset 999 au 6 imap incorrect - fix (ynq)y
fileset 999 au 6 iemap incorrect - fix (ynq)y
incorrect CUT entry for fileset 999, fix? (ynq)y
au 10 emap incorrect - fix? (ynq)y
au 10 summary incorrect - fix? (ynq)y
au 10 state file incorrect - fix? (ynq)y
au 27 emap incorrect - fix? (ynq)y
au 27 summary incorrect - fix? (ynq)y
au 32 emap incorrect - fix? (ynq)y
au 32 summary incorrect - fix? (ynq)y
au 33 emap incorrect - fix? (ynq)y
au 33 summary incorrect - fix? (ynq)y
au 33 state file incorrect - fix? (ynq)y
au 36 emap incorrect - fix? (ynq)y
au 36 summary incorrect - fix? (ynq)y
au 37 emap incorrect - fix? (ynq)y
au 37 summary incorrect - fix? (ynq)y
au 38 emap incorrect - fix? (ynq)y
au 38 summary incorrect - fix? (ynq)y
au 39 emap incorrect - fix? (ynq)y
au 39 summary incorrect - fix? (ynq)y
au 42 emap incorrect - fix? (ynq)y
au 42 summary incorrect - fix? (ynq)y
au 42 state file incorrect - fix? (ynq)y
au 43 emap incorrect - fix? (ynq)y
au 43 summary incorrect - fix? (ynq)y
au 43 state file incorrect - fix? (ynq)y
au 44 state file incorrect - fix? (ynq)y
au 46 emap incorrect - fix? (ynq)y
au 46 summary incorrect - fix? (ynq)y
au 50 emap incorrect - fix? (ynq)y
au 50 summary incorrect - fix? (ynq)y
au 67 emap incorrect - fix? (ynq)y
au 67 summary incorrect - fix? (ynq)y
au 84 emap incorrect - fix? (ynq)y
au 84 summary incorrect - fix? (ynq)y
au 88 emap incorrect - fix? (ynq)y
au 88 summary incorrect - fix? (ynq)y
au 90 emap incorrect - fix? (ynq)y
au 90 summary incorrect - fix? (ynq)y
au 91 emap incorrect - fix? (ynq)y
au 91 summary incorrect - fix? (ynq)y
au 148 emap incorrect - fix? (ynq)y
au 148 summary incorrect - fix? (ynq)y
fileset 999 iau 6 summary incorrect - fix? (ynq)y
free block count incorrect 1694372 expected 1747750 fix? (ynq)y
free extent vector incorrect fix? (ynq)y
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
fileset 999 au 0 imap incorrect - fix (ynq)y
fileset 999 au 0 iemap incorrect - fix (ynq)y
au 188 emap incorrect - fix? (ynq)y
au 188 summary incorrect - fix? (ynq)y
au 188 state file incorrect - fix? (ynq)y
au 231 state file incorrect - fix? (ynq)y
au 336 state file incorrect - fix? (ynq)y
au 337 summary incorrect - fix? (ynq)y
au 337 state file incorrect - fix? (ynq)y
free block count incorrect 5040121 expected 5040120 fix? (ynq)y
free extent vector incorrect fix? (ynq)y
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
fileset 999 primary-ilist inode 116 unreferenced file, reconnect? (ynq)y
pass4 - checking resource maps
fileset 999 au 0 imap incorrect - fix (ynq)y
fileset 999 au 0 iemap incorrect - fix (ynq)y
au 29 emap incorrect - fix? (ynq)y
au 29 summary incorrect - fix? (ynq)y
au 29 state file incorrect - fix? (ynq)y
au 64 state file incorrect - fix? (ynq)y
au 109 state file incorrect - fix? (ynq)y
free block count incorrect 4740646 expected 4740645 fix? (ynq)y
free extent vector incorrect fix? (ynq)y
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
log replay in progress
vxfs fsck: file system does not contain a valid log
vxfs fsck: cannot perform log replay
file system is not clean, full fsck required
pass0 - checking structural files
pass1 - checking inode sanity and blocks
pass2 - checking directory linkage
pass3 - checking reference counts
pass4 - checking resource maps
OK to clear log? (ynq)y
set state to CLEAN? (ynq)y
*****************Mounting BCV Volumes at 12:18:20-16-11-2004***********
*****************Executing Backup of BCV Volumes at
12:18:43-16-11-2004****
EXIT STATUS 96: unable to allocate new media for backup, storage unit has
none available
*****************Unmounting BCV Volumes at 14:29:41-16-11-2004*********
*****************Stopping BCV Volumes at 14:30:05-16-11-2004************
*****************Deporting BCV Disk Group at 14:30:06-16-11-2004******
TIA.................
Thanks & Regards
Mangesh Vengsarkar
DISCLAIMER: The information contained in this message is intended only and solely for the addressed individual or entity indicated in this message and for the exclusive use of the said addressed individual or entity indicated in this message (or responsible for delivery of the message to such person) and may contain legally privileged and confidential information belonging to Tata Consultancy Services Limited. It must not be printed, read, copied, disclosed, forwarded, distributed or used (in whatsoever manner) by any person other than the addressee. Unauthorized use, disclosure or copying is strictly prohibited and may constitute unlawful act and can possibly attract legal action, civil and/or criminal. The contents of this message need not necessarily reflect or endorse the views of Tata Consultancy Services limited on any subject matter.
Any action taken or omitted to be taken based on this message is entirely at your risk and neither the originator of this message nor Tata Consultancy Services Limited takes any responsibility or liability towards the same. Opinions, conclusions and any other information contained in this message that do not relate to the official business of Tata Consultancy Services limited shall be understood as neither given nor endorsed by Tata Consultancy Services Limited or any affiliate of Tata Consultancy Services Limited. If you have received this message in error, you should destroy this message and may please notify the sender by e-mail.
Thank you.
More information about the SunHELP
mailing list