[SunHELP] scp problem from openssh to f-secure

[Mohd Yazid]

Hi,
I have problem scp'ing from one system to the other,
both system is running solaris 8, both don't have any
problem running ssh and sftp.

System A is installed with OpenSSH_3.6.1p1.
System B (web03)is installed with F-Secure SSH 3.1.0
(build 8)

I want to scp from System A to System B.
Below is the output of scp -v

SysA# scp -v2 web03:/etc/hosts /tmp
Executing: program /usr/local/bin/ssh host web03, user
(unspecified), command scp -v -f /etc/hosts
OpenSSH_3.6.1p1, SSH protocols 1.5/2.0, OpenSSL
0x0090702f
debug1: Reading configuration data
/usr/local/etc/ssh_config
debug1: Rhosts Authentication disabled, originating
port will not be trusted.
debug1: Connecting to web03 [x.x.x.x] port 22.
debug1: Connection established.
debug1: identity file /.ssh/id_rsa type -1
debug1: identity file /.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software
version 3.1.0 F-SECURE SSH
debug1: no match: 3.1.0 F-SECURE SSH
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.6.1p1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: sending SSH2_MSG_KEXDH_INIT
debug1: expecting SSH2_MSG_KEXDH_REPLY
debug1: Host 'web03' is known and matches the DSA host
key.
debug1: Found key in /.ssh/known_hosts:1
debug1: ssh_dss_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue:
publickey,password
debug1: Next authentication method: publickey
debug1: Trying private key: /.ssh/id_rsa
debug1: Trying private key: /.ssh/id_dsa
debug1: Next authentication method: password
root at web03's password: 
debug1: Authentication succeeded (password).
debug1: fd 5 setting O_NONBLOCK
debug1: fd 6 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: Sending command: scp -v -f /etc/hosts
debug1: channel 0: request exec
debug1: channel 0: open confirm rwindow 100000 rmax
32768
scp: warning: Executing scp1 compatibility.
debug1: client_input_channel_req: channel 0 rtype
exit-status reply 0
debug1: channel 0: rcvd close
debug1: channel 0: output open -> drain
debug1: channel 0: close_read
debug1: channel 0: input open -> closed
scp: FATAL: Executing ssh1 in compatibility mode
failed (Check that scp1 is in your PATH).
debug1: channel 0: obuf empty
debug1: channel 0: close_write
debug1: channel 0: output drain -> closed
debug1: channel 0: almost dead
debug1: channel 0: gc: notify user
debug1: channel 0: gc: user detached
debug1: channel 0: send close
debug1: channel 0: is dead
debug1: channel 0: garbage collecting
debug1: channel_free: channel 0: client-session,
nchannels 1
debug1: fd 0 clearing O_NONBLOCK
debug1: fd 1 clearing O_NONBLOCK
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes
in 0.0 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0,
stderr 0.0
debug1: Exit status 255
SysA#


I have run scp specifying it to use ssh version 2
instead of 1, but it still looking for scp1. Both
server don't have scp1 installed. If anyone have
experience this or had similar problem please let me
know (your solution). System A is actually a new
server. We would like to use Openssh on the new
servers, without changing any software configuration
on the old systems.

Regards,
/yazid


__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com