[SunHELP] Sun 3510fc SAN serial port

[Tom Jones]

Here's the port config from our Annex box which is connected to our 3510FC:

port asy4:

                        Port Generic Parameters

                mode: slave                        location: ""
                type: hardwired                    term_var: ""
              prompt: ""                      cli_interface: uci
               speed: 38400                        autobaud: N
           data_bits: 8                           stop_bits: 1
              parity: none                max_session_count: 3
     allow_broadcast: Y                 broadcast_direction: port
         imask_7bits: N                          cli_imask7: Y
   ps_history_buffer: 0                              banner: Y
       tcp_keepalive: 0                   dedicated_address: 0.0.0.0
      dedicated_port: 5004                    type_of_modem: ""
default_session_mode: interactive       dedicated_arguments: ""
    resolve_protocol: connect

Note the baud rate of 38400.  

Tom Jones

----- Original Message ----- 
From: "Francois Dion" <fdion at atriumwindows.com>
To: "The SunHELP List" <sunhelp at sunhelp.org>
Sent: Monday, March 01, 2004 9:10 AM
Subject: [SunHELP] Sun 3510fc SAN serial port


> How do you talk to the box? What kind of cable? I have a serial cable, 
> null modem adapter, gender changers, db9->rj45 Sun adapters and I tried 
> all kinds of combos and I get nothing. I can access all my other Sun 
> equipment with the serial console, but this unit uses a db9 instead of 
> an rj45, so that might have something to do.
> 
> I have to get to the serial console to set the IP address, then I'll be 
> able to manage it from my management network, but if I cant get on the 
> console, I cant set that.
> 
> Any idea?
> 
> Thanks,
> Francois
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp