[SunHELP] Problem with Netra t 1125

[Suraj Talreja]

Hi,
Press "stop+a" (without the quotes), u will be taken to ok prompt.
then type ok set-defaults

This should serve ur purpose.

Regards,

Suraj.

-----Original Message-----
From: Michael Karl [mailto:mk at lexcom-net.de]
Sent: Saturday, February 07, 2004 7:26 AM
To: sunhelp at sunhelp.org
Subject: [SunHELP] Problem with Netra t 1125


Hello,

I got an used Netra t 1125 for testing.

Problem: via "tip hardwire" (Null-Modem-Connection to an Ultra 10) I get
only cryptical signs. The /etc/remote settings on Ultra 10 are correct.
(docs.sun.com - Service Manual Netra t 1120/1125)

I'm thinking, the OBP-settings on the Netra are modified.

HOWTO: reset or restore the default factory setting ?:-(
(With keyboard "stop+n" doesn't work)

Thanks Michael
_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp

Disclaimer:
This e-mail may contain Privileged/Confidential information and is
intended only for the individual(s) named. Please notify the sender, if
you have received this e-mail by mistake and delete it from your system.
Information in this message that do not relate to the official business of
the company shall be understood as neither given nor endorsed by it.
E-mail transmission cannot be guaranteed to be secure or error-free. The
sender does not accept liability for any errors or omissions in the
contents of this message which arise as a result of e-mail transmission.
If verification is required please request a hard-copy version.
Visit us at www.kaleconsultants.com