[SunHELP] AIT3 Drive install problem

[Dale Ghent]

On Aug 5, 2004, at 10:49 PM, Bryan Pennington wrote:

>
> Please help if you can. What am I doing wrong?? Do I need a seperate 
> driver
> for the scsi controller? The qlogic website had no info about my card. 
> I've
> never had this much trouble with a scsi card and tape drive.

The qus driver is the one used for your SCSI card. Make sure you have 
patch 112697-04
  installed.

otherwise, your config should work. Even with a stock st.conf.

/dale