[SunHELP] Problem connecting D1000 to E3500

[Bharat Balasubramanian]

Hi,

1)Check with /usr/platform/sun4u/sbin/prtdiag -v is you can see the SCSI
card.
2)does it show by probe-scsi-all at ok prompt.
3)if not then check for the termination.
4) if nothing works also check using touch /.reconfigure
5) reboot


Thanks and Regards

Bharat



----- Original Message -----
From: "Pedro Roman Vela" <Pedro.Roman at ydilo.com>
To: <sunhelp at sunhelp.org>
Sent: Thursday, October 02, 2003 8:07 PM
Subject: [SunHELP] Problem connecting D1000 to E3500


> Hi,
> I'm trying to connect a D1000 array to a E3500, the machine doesn't see
any
> D1000 disk. I have installed a differential SCSI card into the box but the
> disks are still not seen. I can't determine what is the source of the
problem:
> the SCSI card, the cable, the D1000...
>
> Any ideas of what I could try?
> Thanks in advance
> --------------------------------------------------------------------------
---
> ---------
> This message and any files transmitted with it are confidential and
intended
> solely
> for the use of the individual or entity to whom they are addressed. No
> confidentiality
> or privilege is waived or lost by any wrong transmission.
> If you have received this message in error, please immediately destroy it
and
> kindly
> notify the sender by reply email.
> You must not, directly or indirectly, use, disclose, distribute, print, or
> copy any
> part of this message if you are not the intended recipient. Opinions,
> conclusions and
> other information in this message that do not relate to the official
business
> of
> Ydilo Advanced Voice Solutions, S.A. shall be understood as neither given
nor
> endorsed by it.
> --------------------------------------------------------------------------
---
> ---------
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp