[SunHELP] Losing Packets on qfe port

[Jim Richey]

Make sure the duplex (half/full) is set correctly for that port. You
might want to turn off autonegotiate and force the duplex to whatever
your switch is set to.


Joe Pampel wrote:
> 
> What do you see on a netstat -k qfe0 ?  This could help ID the specific issue.
> 
> of course, it could just be a hardware issue too..  :(
> 
> - Joe
> 
> >>> "Christopher Cooper" <chriscoo at nortelnetworks.com> 09/22/02 01:32PM >>>
> Hardware: E250
> Software: Solaris 6
> 
> I have a four port Ethernet quad in a E250, of which only the first port is
> being used (qfe0). The system has been stable for several weeks, but
> suddenly its losing about 20% of the IP packets. All other nodes on the
> subnet are working ok with no abnormal packet loss.
> 
> I've stopped the two applications running on the server with no affect. As
> well as stopping and restarting the port and even restarting the server. All
> to no avail.
> 
> Any ideas ??
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
> 
> **********************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
> 
> This footnote also confirms that this email message has been swept by
> MIMEsweeper for the presence of computer viruses.
> 
> www.mimesweeper.com
> **********************************************************************
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp

-- 

Jim Richey
jrichey at highmark.com
Highmark, Inc.
http://www.highmark.com