[SunHELP] Boot timeout on SunFire V100

[Mahantesh]

Hi,
I know this is similar to the thread running on the list right now. But
there are few dfferernces in my problem. So posting it here.
We have got second hand SunFire V100 whose background we donot know.It
does not either keyboard or monitor.
I conected to it using some other system with tip. When I power on the
system I am getting the following messages:
==========================================================================================================
Power restored

LOMlite console
lom>
LOM event: +0h0m0s LOM booted
lom>
LOM event: +0h0m0s host power on
peed = [Speed Jumper = 5] 500 MHz
Baud rate is 9600
8 Data bits, 1 stop bits, no parity (configured from lom)

Firmware CORE  Sun Microsystems, Inc.
@(#) core 1.0.14 2001/11/07 17:16
Hardware Power ON
Verifying NVRAM...Done
Bootmode is 0
MCR0 = 36a0bc06
MCR1 = c0804000
MCR2 = f80a000
MCR3 = 202
Ecache Size = 256 KB
NVRAM Test
Icache Test
Dcache Test
MMU Test
Ecache Tag Addr Test
Ecache RAM Addr Test
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x60000000
MEMSIZE=0x8000000
Data Line Test
Core Memory Test
Clearing memory...including Unix retained memory...Done
Turning ON MMUs Done
Copy ROM to RAM (154112 bytes) Done
Orig PC=0x1fff0007ef0  New PC=0xf0f07f48
Processor Speed=500MHz
Memory Data Line Test
Memory Addr Line w/ Ecache Test
ECC Block Memory Test
Looking for Dropin cPOST ... found
Decompressing Client Done
Transferring control to Client...

Sun Microsystems, Inc.     cPOST
@(#) cpost 1.0.14 2001/11/07 17:16

All Basic UltraSPARC IIe PBM Tests 
        Init CPU PBM 
        PIO Decoder And BCT Test
        CPU IOMMU Reg Test
        CPU IOMMU RAM NTA Test
        CPU IOMMU CAM NTA Test
        CPU IOMMU RAM Address Test
        CPU IOMMU CAM Address Test
        IOMMU TLB Compare Test
        IOMMU TLB Flush Test
        PBM Control/Status Reg Test
        PBM Diag Reg Test
        CPU PBM Reg Test

DM9102A Ethernet #1 Config Space Reg Test
DM9102A Ethernet #2 Config Space Reg Test
Basic SouthBridge Tests
        Southbridge ISA Config Space Reg Test
        Southbridge PMU Config Space Reg Test
        Southbridge IDE Config Space Reg Test
        Southbridge USB Config Space Reg Test
All Memory Stress Tests
        Consist Write Data Test
Resetting...

Processor Speed = 500 MHz
Baud rate is 9600
8 Data bits, 1 stop bits, no parity (configured from lom)

Firmware CORE  Sun Microsystems, Inc.
@(#) core 1.0.14 2001/11/07 17:16
Software Power ON
Verifying NVRAM...Done
Bootmode is 0
MCR0 = 36a0bc06
MCR1 = c0804000
MCR2 = f80a000
MCR3 = 202
Ecache Size = 256 KB
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing memory
Done
MEMBASE=0x60000000
MEMSIZE=0x8000000
Clearing memory...Done
Turning ON MMUs Done
Copy ROM to RAM (154112 bytes) Done
Orig PC=0x1fff0007ef0  New PC=0xf0f07f48
Processor Speed=500MHz
Looking for Dropin FVM ... found
Decompressing Client Done
Transferring control to Client...
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0 
Probing upa at 1f,0 pci 
Probing upa at 0,0 SUNW,UltraSPARC-IIe (256 Kb)
Loading Support Packages: kbd-translator 
Loading onboard drivers: 
Probing /pci at 1f,0 Device 7  isa dma rtc power SUNW,lomh serial serial 
   flashprom 
Probing /pci at 1f,0 Device 3  pmu i2c temperature dimm i2c-nvram idprom 
   motherboard-fru ppm beep fan-control 
lomp 
Probing Memory Bank #0   0 Megabytes
Probing Memory Bank #1   0 Megabytes
Probing Memory Bank #2   0 Megabytes
Probing Memory Bank #3 128 Megabytes
Probing /pci at 1f,0 Device 7  
Probing /pci at 1f,0 Device 3  
Probing /pci at 1f,0 Device c  ethernet 
Probing /pci at 1f,0 Device 5  ethernet 
Probing /pci at 1f,0 Device a  usb 
Probing /pci at 1f,0 Device d  ide disk cdrom 
todm5819 Sun Fire V100 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 128 MB memory installed, Serial #51497491.
Ethernet address 0:3:ba:11:ca:13, Host ID: 8311ca13.



Environment monitoring: disabled
Boot device: net  File and args:                                      
Using Onboard Transceiver - Link Up. 
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
=================================================================================================================================

it is not stopping at LOM prompt so that I can make it to boot through
CD and reinstall the OS.
Any idea on how to go about it.

Thanks.
mahantesh.