[SunHELP] Quad Ethernet Card

[Nejhdeh Ghevondian]

Hi all,
I have an old IPX system that has an on-board DB15-way Ethernet system.
During boot-up it recognizes it at ok prompt
ok> sbus at 1,f80000000,le at 0,c00000
this is also mapped to the net alias (sbus/le)
 
Now I have an sbus quad Ethernet controller that I've installed into the
system. Its details are
ok>sbus at 1,f80000000/SUNW,qfe at 0,8c00000
ok>sbus at 1,f80000000/SUNW,qfe at 1,8c10000
ok>sbus at 1,f80000000/SUNW,qfe at 2,8c20000
ok>sbus at 1,f80000000/SUNW,qfe at 3,8c30000
 
Two problems arise:
 
1. If I do say 
 
ok> test sbus at 1,f80000000/SUNW,qfe at 0,8c00000
I get the following error
Interrupt 15
 
DOES THIS MEAN THE IRQs of some peripheral on the sbus and this quad
card is a clash????
 
2. If I want to make the quad card the default Ethernet controller I.e
the le interface,
how do I disconnect from le at 0 to say qfe at 0.
 
Note: I'm running a 2.4 version obp
 
thanks
_________________________ 
Dr Nejhdeh Ghevondian
CEO - AiMedics Pty Ltd
Phone: +61 2 9209 4510 
Fax: +61 2 9319 3874 
Email: nejhdeh at AiMedics.com 
www.AiMedics.com 
_________________________
 
The information contained within this e-mail and other attached material
is private and intended solely for the 
intended recipient(s). For those other than the recipient, any
disclosure, copying or distribution of the 
contained material is prohibited.