[SunHELP] Sparc 20 sees new hard drive but won't boot from it

Dave Lowenstein davidlowie at hotmail.com
Tue Feb 5 12:14:38 CST 2002


Okay, Here's the situation:

I have a sparcstation 20 that I bought 2 new hard drives for. They're IBM 
U160 drives (model dmvs, 9 gig). I added one of the new drives, boot -r'ed, 
and partitioned the new drive. I then copied all of the data from the 
original 4 gig drive to the new 9 gig drive, 1 partition at a time using the 
following commands (taken from the ufsrestore man page)

mount /dev/dsk/c0t1d0s0 /mnt (mount the / partition of the new drive to 
/mnt)

ufsdump 0f - /dev/rdsk/c0t3d0s0 | (cd /mnt; ufsrestore xf -)

After I copied all of the partitions I ran installboot to install the boot 
block on /dev/rdsk/c0t1d0s0 (the new drive).

Thinking that everything was going my way, I halted the computer, removed 
both drives, and put the new drive in as the root drive. When I turned it 
back on, it didn't see the new drive and tried to boot from the network. No 
matter what combination of jumper settings I've tried on the drive I can't 
boot from it and open boot won't see it. However, as long as I boot from the 
original hard drive with my new drive as a 2nd drive, the 2nd drive works 
just fine.

Any ideas?

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.



More information about the SunHELP mailing list