[SunHELP] SCSI errors

[Jon]

I've just done a fresh install of Solaris 8 on a new disk. The system is
an Axil 320 (Dual 150) and a SEAGATE SX318203LC disk. I'm using a
50 pin to 80 pin adapter on the scsi disk. Could this be the culprit?
Below are the errors I'm getting at boot time:

====================================
Axil-320 MP (2 X RT625), No Keyboard
ROM Rev. 2.19, 224 MB memory installed, Serial #9905759.
Ethernet address 0:0:3b:80:49:73, Host ID: 7297265f.



Rebooting with command:
Boot device: /iommu/sbus/espdma at f,400000/esp at f,800000/sd at 0,0:a  File and
args:
SunOS Release 5.8 Version Generic 32-bit
Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.
WARNING: /iommu at f,e0000000/sbus at f,e0001000/espdma at f,400000/esp at f,800000
(esp0):
        gross error in esp status (c3)
WARNING:
/iommu at f,e0000000/sbus at f,e0001000/espdma at f,400000/esp at f,800000/sd at 0,0
(sd0):
        SCSI transport failed: reason 'tran_err': retrying command

configuring IPv4 interfaces: le0.
Hostname: ace
WARNING: /iommu at f,e0000000/sbus at f,e0001000/espdma at f,400000/esp at f,800000
(esp0):
        gross error in esp status (d3)
WARNING:
/iommu at f,e0000000/sbus at f,e0001000/espdma at f,400000/esp at f,800000/sd at 0,0
(sd0):
        SCSI transport failed: reason 'tran_err': retrying command

WARNING: /iommu at f,e0000000/sbus at f,e0001000/espdma at f,400000/esp at f,800000
(esp0):
        gross error in esp status (c3)
WARNING:
/iommu at f,e0000000/sbus at f,e0001000/espdma at f,400000/esp at f,800000/sd at 0,0
(sd0):
        SCSI transport failed: reason 'reset': retrying command

WARNING:
/iommu at f,e0000000/sbus at f,e0001000/espdma at f,400000/esp at f,800000/sd at 0,0
(sd0):
        SCSI transport failed: reason 'tran_err': retrying command
======================================

Jon