[SunHELP] SCSI Errors

[Billy Mutale]

I've recently started getting the following errors on my E250. I've 
checked and re-checked the connections to my 6 x external DLT drives but 
the problem persists.

Any help is much appreciated.

Billy



Sep  5 05:17:31 SunE250 scsi: [ID 107833 kern.warning] WARNING: 
/pci at 1f,4000/scsi at 2,1/st at 3,0 (st24):
Sep  5 05:17:31 SunE250 	Error for Command: rezero/rewind           Error 
Level: Fatal
Sep  5 05:17:31 SunE250 scsi: [ID 107833 kern.notice] 	Requested Block: 0 
                         Error Block: 0
Sep  5 05:17:31 SunE250 scsi: [ID 107833 kern.notice] 	Vendor: QUANTUM 
                         Serial Number:  +
Sep  5 05:17:31 SunE250 scsi: [ID 107833 kern.notice] 	Sense Key: Unit 
Attention
Sep  5 05:17:31 SunE250 scsi: [ID 107833 kern.notice] 	ASC: 0x29 (<vendor 
unique code 0x29>), ASCQ: 0x3, FRU: 0x0
Sep  5 05:19:46 SunE250 scsi: [ID 365881 kern.info] 
/pci at 1f,4000/scsi at 2,1 (glm3):
Sep  5 05:19:46 SunE250 	Cmd (0x18ef388) dump for Target 3 Lun 0:
Sep  5 05:19:46 SunE250 scsi: [ID 365881 kern.info] 
/pci at 1f,4000/scsi at 2,1 (glm3):
Sep  5 05:19:46 SunE250 		cdb=[ 0x8 0x0 0x0 0x80 0x0 0x0 ]
Sep  5 05:19:46 SunE250 scsi: [ID 365881 kern.info] 
/pci at 1f,4000/scsi at 2,1 (glm3):
Sep  5 05:19:46 SunE250 	pkt_flags=0x0 pkt_statistics=0x61 pkt_state=0x7
Sep  5 05:19:46 SunE250 scsi: [ID 365881 kern.info] 
/pci at 1f,4000/scsi at 2,1 (glm3):
Sep  5 05:19:46 SunE250 	pkt_scbp=0x0 cmd_flags=0x8e1
Sep  5 05:19:46 SunE250 scsi: [ID 107833 kern.warning] WARNING: 
/pci at 1f,4000/scsi at 2,1 (glm3):
Sep  5 05:19:46 SunE250 	Disconnected command timeout for Target 3.0
Sep  5 05:19:46 SunE250 glm: [ID 160360 kern.warning] WARNING: 
ID[SUNWpd.glm.cmd_timeout.6016]
Sep  5 05:19:46 SunE250 scsi: [ID 107833 kern.warning] WARNING: 
/pci at 1f,4000/scsi at 2,1/st at 3,0 (st24):
Sep  5 05:19:46 SunE250 	SCSI transport failed: reason 'timeout': giving up
Sep  5 05:19:46 SunE250




This message is intended only for the use of the person(s) (the "intended recipient (s)") to whom it is addressed.
It may contain information which is privileged and confidential. 
If you are not the intended recipient, please contact the sender as soon as possible.
The views expressed in this communication may not necessarily be the views of InterX plc.
Any copyright in this message shall remain vested in InterX plc and the intended recipient may only copy the same for internal business purposes or as otherwise stated in this message.