[SunHELP] SDS Mirroring on a Sun Blade 100

[Vinay Bharel]

Hi,

I am trying to mirror two identical Seagate drives on a Sun Blade 
100 using DiskSuite 4.2.1. Both drives are on seperate IDE channels.

I am getting the following error:

metainit: blade: c0t2d0s0: overlaps with device in metadevice state database

Does anyone know how to fix this?

TIA

# format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <ST315320A cyl 29649 alt 2 hd 16 sec 63>
          /pci at 1f,0/ide at d/dad at 0,0
       1. c0t2d0 <ST315320A cyl 29647 alt 2 hd 16 sec 63>
          /pci at 1f,0/ide at d/dad at 2,0

# metadb -a -f -c2 /dev/dsk/c0t0d0s7 /dev/dsk/c0t2d0s7
# metainit -f d10 1 1 c0t0d0s0
d10: Concat/Stripe is setup

# metainit -f d20 1 1 c0t2d0s0
metainit: blade: c0t2d0s0: overlaps with device in metadevice state database


- Vinay Bharel <vinay at bharel.com>