[SunHELP] boot - error messages

[Howard Hurst]

Have all your SCSI devices got terminators? I've had that type of parity
error before and one of the terminators had broken.

______________

IMPORTANT: Any views or opinions are solely those of the author and do not
necessarily represent those of United Business Media. The information
transmitted is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material. If you
are not the intended recipient of this message, please do not read, copy,
use or disclose this communication and notify the sender immediately. It
should be noted that any review, retransmission, dissemination or other use
of, or  taking of any action in reliance upon, this information by persons
or entities other than the intended recipient is prohibited.

> -----Original Message-----
> From: sunhelp-admin at sunhelp.org [mailto:sunhelp-admin at sunhelp.org]On
> Behalf Of Beng Yen Lee
> Sent: Friday, October 05, 2001 4:32 PM
> To: sunhelp at sunhelp.org
> Subject: [SunHELP] boot - error messages
> Importance: High
>
>
> Oct  4 15:29:44 se2 scsi: [ID 107833 kern.warning]
> WARNING: /pci at 1f,4000/scsi at 3 (glm0):
> Oct  4 15:29:44 se2     SCSI bus DATA IN phase parity error
> Oct  4 15:29:44 se2 glm: [ID 663555 kern.warning] WARNING: ID
> [SUNWpd.glm.parity_check.6010]
> Oct  4 15:29:44 se2 scsi: [ID 107833 kern.warning]
> WARNING: /pci at 1f,4000/scsi at 3 (glm0):
> Oct  4 15:29:44 se2     Target 1 reducing sync. transfer rate
> Oct  4 15:29:44 se2 glm: [ID 923092 kern.warning] WARNING: ID
> [SUNWpd.glm.sync_wide_backoff.6014]
> Oct  4 15:29:44 se2 scsi: [ID 107833 kern.warning]
> WARNING: /pci at 1f,4000/scsi at 3 (glm0):
> Oct  4 15:29:44 se2     SCSI bus DATA IN phase parity error
> Oct  4 15:29:44 se2 glm: [ID 663555 kern.warning] WARNING: ID
> [SUNWpd.glm.parity_check.6010]
> Oct  4 15:29:44 se2 scsi: [ID 107833 kern.warning]
> WARNING: /pci at 1f,4000/scsi at 3 (glm0):
> Oct  4 15:29:44 se2     Target 1 disabled wide SCSI mode
> Oct  4 15:29:44 se2 glm: [ID 681974 kern.warning] WARNING: ID
> [SUNWpd.glm.sync_wide_backoff.6012]
> Oct  4 15:29:44 se2 scsi: [ID 107833 kern.warning]
> WARNING: /pci at 1f,4000/scsi at 3 (glm0):
> Oct  4 15:29:44 se2     Target 1 reverting to async. mode
> Oct  4 15:29:44 se2 glm: [ID 802533 kern.warning] WARNING: ID
> [SUNWpd.glm.sync_wide_backoff.6013]
> Oct  4 15:29:44 se2 scsi: [ID 193665 kern.info] sd1 at glm0: target 1
> lun 0
> Oct  4 15:29:44 se2 genunix: [ID 936769 kern.info] sd1
> is /pci at 1f,4000/scsi at 3/sd at 1,0
> Oct  4 15:29:44 se2 scsi: [ID 365881 kern.info]         <SUN18G cyl
> 7506 alt 2 hd 19 sec 248>
> Hi, the following appears during system boot time. is there any one can
> tell me how to solve the following problem ? Thank you very much.
>
>
> Oct  4 15:29:45 se2 scsi: [ID 193665 kern.info] sd21 at glm1: target 6
> lun 0
> Oct  4 15:29:45 se2 genunix: [ID 936769 kern.info] sd21
> is /pci at 1f,4000/scsi at 2/sd at 6,0
> Oct  4 15:29:48 se2 swapgeneric: [ID 308332 kern.info] root
> on /pseudo/md at 0:0,0,blk fstype ufs
> Oct  4 15:29:48 se2 genunix: [ID 370176 kern.warning] WARNING:
> forceload of misc/md_trans failed
> Oct  4 15:29:48 se2 genunix: [ID 370176 kern.warning] WARNING:
> forceload of misc/md_raid failed
> Oct  4 15:29:48 se2 genunix: [ID 370176 kern.warning] WARNING:
> forceload of misc/md_hotspares failed
>
>
> Regards,
> Lee
>
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
>