[SunHELP] Invalid Sbus slot number 6

[Matt Bettinger]

I made that pretty ascii and it came out botched up at any rate

starting from the left i have my first 2 SCSI ID terminals jumpered,  the last
one is open.  the PARITY terminals are open, the TERM is jumpered, the TEST is
open, the BLOCK is jumpered, the EJECT is open.


bran tregare wrote:

> how are your jumpers set on the plextor?  the blocksize jumper should be on
> and the parity jumper should be off, you should also have the cd set to ID
> 6 (ds 1 and ds2 jumpered, ds0 open.) also, you may need to remove the
> termination jumper on it, i've had ultra 1's (and 20's and 5's) fail to
> boot if the term jumper was active on the internal cdroms.
>
> At 03:57 AM 11/18/01 -0600, you wrote:
> >Hello,
> >
> >i still have an error and cannot get this sun ultra 2 to boot off of a
> >cdrom.  I have the cd's burned ok as far as i know.
> >
> >When i boot the machine the first line i see is 'Invalid sbus slot
> >number 6"  Has anyone ever seen this before?  The cdrom is a plextor and
> >it has the boot block jumper and a parity jumper and scsi ID jumpers.
> >The only devices on this machine are a scsi drive and the cdrom.  I have
> >the cdrom cables set up right (according to sun docs).
> >
> >I am at a loss here and this is my last resort before i either give this
> >machine away or sell it.  Does it sound like there is a hardware problem
> >,  conflict ?   Thank you for any help.
> >
> >Matt in Houston
> >
> >_______________________________________________
> >SunHELP maillist  -  SunHELP at sunhelp.org
> >http://www.sunhelp.org/mailman/listinfo/sunhelp
>
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp