[SunHELP] obp screen size on sunblade100

[Hichael Morton]

Brian,

I had just the opposite problem!  The screen was too big.  Plus it would
work on a cheapie HP 15" non-multisync monitor but not my Sun 19"
monitor

I held down "stop-n" as I powered-on the blade to reset the OBP
settings.  I did this several times and finally the Sun monitor synced
with the Blade.  IT still worked with the cheapie HP monitor which
surprised me since no other Sun Blade/Ultra2,5,10,SS5.SS10 would evern
work with it.

Anyway, after the monitor synced, I have not had any problem.  


Hope this helps!

HM


Brian Hinz wrote:
> 
> Hi all,
> 
> i just picked up a sunblade100 and was wondering if any of you know how to
> set the screen size at the openboot prompt? It displays an annoyingly small
> (6"x4") screen until X starts up. I've tried doubling the defaults of
> screen-#columns and screen-#rows but this makes no noticable difference.
> 
> Thanks,
> -brian
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com