[SunHELP] RE:Sparc 20 is not bootable...

[-Mark-]

Were you booting off one of the other disks other than
the default?
Try doing  >boot disk1
Since you did a set-defaults, someone might have set
an alias that you wiped out.

Mark

--- "LLamas-Higueras, Javier" <jllamas at ssa.siemens.es>
wrote:
> 
> 	Thanks Peter,
> 
> 	probe-scsi-all works...
> 
> > <#0> ok probe-scsi-all
> 
>
/iommu at f,e0000000/sbus at sbusf,e0001000/dma at 3,81000/esp at 3,80000
> 
>
/iommu at f,e0000000/sbus at sbusf,e0001000/dma at 1,81000/esp at 1,80000
> 
>
/iommu at f,e0000000/sbus at sbusf,e0001000/espdma at f,400000/esp at f,80000
> 	Target 1
> 	Unit 0 Disk SEAGATE ST/312000(and so on...)
> 	Target 3
> 	Unit 0 Disk FUJITSU M2952ESPSUN2.1G(and so on...)
> 	Target 6
> 	Unit 0 Removable Read Only device
> TOSHIBAXM-4101TASUNSLCD342412/08/94
> 
> 	Hope it helps!
> 	Javi
> > --__--__--
> > 
> > Message: 10
> > From: "Peter Stokes" <peter at ashlyn.co.uk>
> > To: <sunhelp at sunhelp.org>
> > Subject: RE: [SunHELP] Sparc 20 is not bootable...
> > Date: Thu, 24 May 2001 13:10:38 +0100
> > Reply-To: sunhelp at sunhelp.org
> > 
> > Hi Javi
> > 
> > What happens when you do a probe-scsi?
> > 
> > Peter
> > 
> > -----Original Message-----
> > From: sunhelp-admin at sunhelp.org
> [mailto:sunhelp-admin at sunhelp.org]On
> > Behalf Of LLamas-Higueras, Javier
> > Sent: 24 May 2001 13:57
> > To: 'sunhelp at sunhelp.org'
> > Subject: [SunHELP] Sparc 20 is not bootable...
> > 
> > 
> > Hi you all,
> > We have been using and old sparc20 like a routter
> for our net exclusively,
> > but yesterday after we did a password change we
> decided to reboot also the
> > machine. The problem is that the machine can NOT
> be bootable since this
> > reboot.
> > 
> > My messages are the following:
> > ....
> > <#0> ok set-defaults
> > .....
> > <#0> ok boot
> > Robooting with command:
> > Boot device:
> /iommu/sbus/espdma at f,4000001/esp at f,800000/sd at 3,0
> File and
> > args:
> > bootblk: cant find the boot program
> > Program terminated
> > Type help for more information
> > <#0> ok
> > ...
> > <#0> ok sync
> > No callback routine has been installed
> > <#0> ok
> > ....
> > <#0> ok boot cdrom
> > (wait a few seconds \ )
> > Level 15 interrupt
> > Type help for more information
> > <#0> ok
> > ...
> > The machines gets 2 cpus, ok, we already put it
> out and changed but the
> > problem remains..
> > Also we tried putting out and changing RAM
> modules...
> > 
> > I think that could be a problem related to the
> EPROM memory but I dont
> > know...
> > 
> > Thanks in advance.
> > Javi
> > 
> > 
> > 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp


__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/