[SunHELP] fcal disk as the boot device (E3500)

Mon Mar 26 18:18:12 CST 2001

--------------9C6B730547C12F9210D6F39D
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

amtronix wrote:

>
> Hi all,  I have a new 3500 with one 18.2GB internal fcal disk as the
> boot device, Solaris 2.7 was installed and runs normally. however, one
> of my apps requires 2.6.  I start the 2.6 install using the Operating
> Environment Installation CD(Feb 2000), and then select that 2.6 be
> installed. But, the system rebooting fail and some messages show as
> below: /sbus at 2,0/SUNW,socal at d,10000/sf at 0,0/ssd at w2100002037c359cf,0:aFile
> and args:
> SunOS Release 5.6 Version Generic_105181-19 [UNIX(R) System V Release
> 4.0]
> WARNING:
> /sbus at 2,0/SUNW,socal at d,10000/sf at 0,0/ssd at w2100002037c359cf,0(ssd0):
> disk not responding to selection  .
>
> Has anyone seen this before, or have some pointers for me as far as
> troubleshooting this?  Min Jian Amtronix, Inc

ALSO check the disk firmware and upgrade ir.

/Gayantha

--------------9C6B730547C12F9210D6F39D
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#FFFFFF">
amtronix wrote:
<blockquote TYPE=CITE>  
 Hi all,  I have a new 3500 with one 18.2GB internal fcal disk
as the boot device, Solaris 2.7 was installed and runs normally. however,
one of my apps requires 2.6.  I start the 2.6 install using the Operating
Environment Installation CD(Feb 2000), and then select that 2.6 be installed.
But, the system rebooting fail and some messages show as below: /<a href="mailto:sbus at 2">sbus at 2</a>,0/<a href="mailto:SUNW,socal at d">SUNW,socal at d</a>,10000/<a href="mailto:sf at 0">sf at 0</a>,0/<a href="mailto:ssd at w2100002037c359cf">ssd at w2100002037c359cf</a>,0:aFile
and args:
 SunOS Release 5.6 Version Generic_105181-19 [UNIX(R) System V Release
4.0]
 WARNING: /<a href="mailto:sbus at 2">sbus at 2</a>,0/<a href="mailto:SUNW,socal at d">SUNW,socal at d</a>,10000/<a href="mailto:sf at 0">sf at 0</a>,0/<a href="mailto:ssd at w2100002037c359cf">ssd at w2100002037c359cf</a>,0(ssd0):
 disk not responding to selection  . 
Has anyone seen this before, or have some pointers for me as far as
 troubleshooting this?  Min
Jian Amtronix, Inc</blockquote>
ALSO check the disk firmware and upgrade ir.
/Gayantha
</body>
</html>

--------------9C6B730547C12F9210D6F39D--