[SunHELP] vxvm:vxconfigd: ERROR: enable failed: Configuration daemon error -1

Tue Mar 20 07:05:43 CST 2001

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01C0B13E.7832E004
Content-Type: text/plain;
	charset="iso-8859-1"

Not to worry.  This is usually a normal message.  It is caused by Hard
Drives that have not been labeled.  Use format and label the disks.  Once
this is done you should not see this error.

Dennis L. Lund

-----Original Message-----
From: Raju Gogula [mailto:Raju.Gogula at AristaSoft.com]
Sent: Monday, March 19, 2001 6:35 PM
To: sunhelp at sunhelp.org
Subject: [SunHELP] vxvm:vxconfigd: ERROR: enable failed: Configuration
daemon error -1

Hi all,

Hw: Sun E450
OS: "SunOS Release 5.7 Version Generic_106541-14 64-bit [UNIX(R) System V
Release 4.0"

We have installed a new single ended SCSI Controll Host Adapter. After
connecting 2 HDD's ( 2 * 9GB and 16 * 18GB ) this when we ran probe-scsi-all
it is OK. I could successfully load OS on one 9GB and another GB as mirror
of that. I connected the remaining 18HDDs (2*9GB + 16 * 18GB), I could
successfully probe-scsi-all. However, the booting failed with the following
error:

	**************************************
	VxVM starting in boot mode...
	WARNING: /pci at 4,2000/scsi at 1/sd at 0,0 (sd60):
	        corrupt label - wrong magic number
	.
	.
	.  (repeated for all the drives in similar way)
	.

	WARNING: /pci at 4,2000/scsi at 1,1/sd at 0,0 (sd75):
	        corrupt label - wrong magic number

	vxvm:vxconfigd: ERROR: enable failed: Configuration daemon error -1
	        No such file or directory; aborting
	/etc/rcS.d/S25vxvm-sysboot: egettxt: not found

	Halting system...

	*****************************************

Can some one help me why it is happening? Is it something to do with
differential ULTRA SCSI in lieu of Single ended? FYI: We have inserted this
in 66 MHz PCI slot.

Please advice.

Raju
_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp

     - - - - - - -  Appended by Scientific-Atlanta, Inc.  - - - - - - -  
This e-mail and any attachments may contain information which is
confidential, proprietary, privileged or otherwise protected by law. The
information is solely intended for the named addressee (or a person
responsible for delivering it to the addressee). If you are not the intended
recipient of this message, you are not authorized to read, print, retain,
copy or disseminate this message or any part of it. If you have received
this e-mail in error, please notify the sender immediately by return e-mail
and delete it from your computer. 

------_=_NextPart_001_01C0B13E.7832E004
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>RE: [SunHELP] vxvm:vxconfigd: ERROR: enable failed: =
Configuration daemon error -1</TITLE>
</HEAD>
<BODY>

<P><FONT SIZE=3D2>Not to worry.  This is usually a normal =
message.  It is caused by Hard</FONT>
<BR><FONT SIZE=3D2>Drives that have not been labeled.  Use format =
and label the disks.  Once</FONT>
<BR><FONT SIZE=3D2>this is done you should not see this error.</FONT>
</P>

<P><FONT SIZE=3D2>Dennis L. Lund</FONT>
</P>

<P><FONT SIZE=3D2>-----Original Message-----</FONT>
<BR><FONT SIZE=3D2>From: Raju Gogula [<A =
HREF=3D"mailto:Raju.Gogula at AristaSoft.com">mailto:Raju.Gogula at AristaSoft=
.com</A>]</FONT>
<BR><FONT SIZE=3D2>Sent: Monday, March 19, 2001 6:35 PM</FONT>
<BR><FONT SIZE=3D2>To: sunhelp at sunhelp.org</FONT>
<BR><FONT SIZE=3D2>Subject: [SunHELP] vxvm:vxconfigd: ERROR: enable =
failed: Configuration</FONT>
<BR><FONT SIZE=3D2>daemon error -1</FONT>
</P>
<BR>

<P><FONT SIZE=3D2>Hi all,</FONT>
</P>

<P><FONT SIZE=3D2>Hw: Sun E450</FONT>
<BR><FONT SIZE=3D2>OS: "SunOS Release 5.7 Version =
Generic_106541-14 64-bit [UNIX(R) System V</FONT>
<BR><FONT SIZE=3D2>Release 4.0"</FONT>
</P>

We have installed a new single ended SCSI Controll =
Host Adapter. After
 connecting 2 HDD's ( 2 * 9GB and 16 * 18GB ) this =
when we ran probe-scsi-all
 it is OK. I could successfully load OS on one 9GB =
and another GB as mirror
 of that. I connected the remaining 18HDDs (2*9GB + =
16 * 18GB), I could
 successfully probe-scsi-all. However, the booting =
failed with the following
 error:

<P>        <FONT =
SIZE=3D2>**************************************</FONT>
<BR>        <FONT SIZE=3D2>VxVM =
starting in boot mode...</FONT>
<BR>        <FONT SIZE=3D2>WARNING: =
/pci at 4,2000/scsi at 1/sd at 0,0 (sd60):</FONT>
<BR>        <FONT =
SIZE=3D2>        corrupt label - =
wrong magic number</FONT>
<BR>        <FONT SIZE=3D2>.</FONT>
<BR>        <FONT SIZE=3D2>.</FONT>
<BR>        <FONT SIZE=3D2>.  =
(repeated for all the drives in similar way)</FONT>
<BR>        <FONT SIZE=3D2>.</FONT>
</P>

<P>        <FONT SIZE=3D2>WARNING: =
/pci at 4,2000/scsi at 1,1/sd at 0,0 (sd75):</FONT>
<BR>        <FONT =
SIZE=3D2>        corrupt label - =
wrong magic number</FONT>
</P>

<P>        <FONT =
SIZE=3D2>vxvm:vxconfigd: ERROR: enable failed: Configuration daemon =
error -1</FONT>
<BR>        <FONT =
SIZE=3D2>        No such file or =
directory; aborting</FONT>
<BR>        <FONT =
SIZE=3D2>/etc/rcS.d/S25vxvm-sysboot: egettxt: not found</FONT>
</P>

<P>        <FONT SIZE=3D2>Halting =
system...</FONT>
</P>

<P>        <FONT =
SIZE=3D2>*****************************************</FONT>
</P>

Can some one help me why it is happening? Is it =
something to do with
 differential ULTRA SCSI in lieu of Single ended? =
FYI: We have inserted this
 in 66 MHz PCI slot.

<P><FONT SIZE=3D2>Please advice.</FONT>
</P>

<P><FONT SIZE=3D2>Raju</FONT>
<BR><FONT =
SIZE=3D2>_______________________________________________</FONT>
<BR><FONT SIZE=3D2>SunHELP maillist  -  =
SunHELP at sunhelp.org</FONT>
<BR><FONT SIZE=3D2><A =
HREF=3D"http://www.sunhelp.org/mailman/listinfo/sunhelp" =
TARGET=3D"_blank">http://www.sunhelp.org/mailman/listinfo/sunhelp</A></F=
ONT>
</P>
<BR>

- - - - - - -  Appended by =
Scientific-Atlanta, Inc.  - - - - - - - =20
 This e-mail and any attachments may contain information which is =
confidential, proprietary, privileged or otherwise protected by law. =
The information is solely intended for the named addressee (or a person =
responsible for delivering it to the addressee). If you are not the =
intended recipient of this message, you are not authorized to read, =
print, retain, copy or disseminate this message or any part of it. If =
you have received this e-mail in error, please notify the sender =
immediately by return e-mail and delete it from your computer.

</BODY>
</HTML>
------_=_NextPart_001_01C0B13E.7832E004--