[SunHELP] problem with E 450 server loading 2.6

[Tom Jones]

Try the environment CD - sounds like your CPUs are over 400MHz.

----- Original Message ----- 
From: Vivek Kestur <VivekK at Amdocs.com>
To: <sunhelp at sunhelp.org>
Sent: Thursday, March 01, 2001 3:28 PM
Subject: [SunHELP] problem with E 450 server loading 2.6


> Hi,
> 
>  We have a problem with installing Solaris 2.6 on two our E 450 machines. It
> simply doesn't seem to like 2.6
>  When i say boot cdrom on the OK prompt, it gives the following error.
> 
>  Boot device: /pci at 1f,4000/scsi at 2/disk at 6,0:f File and args: 
> SunOS Release 5.6 Version Generic_105181-05 [UNIX(R) System V Release 4.0] 
> Copyright (c) 1983-1997, Sun Microsystems, Inc. 
> panic[cpu1]/thread=0x10404040: recursive rw_enter, lp=10417348 wwwh=10404044
> waiters=0 thread=10404040 
> rebooting... 
> Resetting ... 
>  However i am able to load Solaris 8 on it without any problem. I knew there
> is a problem  with E3500/E4500
>  loading 2.6, so i went ahead and tried the 
> limit-ecache-size
>   on the E 450, but i am still getting the same error, enclosed herewith is
> the details 
>   Sun Enterprise 450 (2 X UltraSPARC-II 480MHz), No Keyboard 
>  OpenBoot 3.20, 2048 MB memory installed, Serial #12885353. 
>  Ethernet address 8:0:20:c4:9d:69, Host ID: 80c49d69. 
> 
>  please help
>  vivek
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
>