[SunHELP] Machine can not boot up.

[Thomas Cameron]

Pull memory modules, and boot with one at a time until the error is
reporoduced.  Replace the bad module.

Thomas Cameron
----- Original Message -----
From: "Meng, Andrew" <Andrew.Meng at capitalone.com>
To: <sunhelp at sunhelp.org>
Sent: Thursday, July 26, 2001 8:32 AM
Subject: [SunHELP] Machine can not boot up.


> Hello everyone,
>
> When I start a Sparc 10 machine, it hangs there with the banners and boot
> devices showing on the screen. In boot  diagnosis mode, it shows " Timeout
> waiting for ARP/RARP) packet". When I run  test-all, it displays: "Testing
> 16 megs of memory at address 18000000 memory address not aligned".
>
> Does anyone see these before? Could you please give some clue? Thanks a
lot!
>
> Andrew
>
> **************************************************************************
> The Information transmitted herewith is sensitive information intended
only
> for use to the individual or entity to which it is addressed. If the
reader
> of this message is not the intended recipient, you are hereby notified
that
> any review, retransmission, dissemination, distribution, copying or other
> use of, or taking of any action in reliance upon, this information is
> strictly prohibited. If you have received this communication in error,
> please contact the sender and delete the material from your computer.
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
>