[SunHELP] Am I screwed??

[Carl-Johan Schenstrom]

No, partitions don't need to be in any specific order. He should be able
to create up to three partitions of the remaining cylinders and newfs them
while sitting comfortably in his chair.

//cjs

On Wed, 18 Jul 2001, John Kennedy wrote:

> Clayton
> It's not the remoteness that has you screwed, it's the fact that your disk is
> partitioned that the only usable slice is slice 7.  All your cylinders are used
> up through cyl 10912.  To use slice 4 you will need to delete slice 5 and 6 and
> re-partition the last 4 slices.  Once you do this all data on slices 5 and 6
> will be lost and you will need to reload the system.  Looks like either way you
> are going on a trip.
> John
> 
> Clayton Winter wrote:
> > 
> > I have been looking at the Netra that was installed whilst I was away.
> > 
> > Current partition table (original):
> > Total disk cylinders available: 38790 + 2 (reserved cylinders)
> > 
> > Part  Tag         Flag     Cylinders    Size       Blocks
> >    0   root       wm       0 - 507      250.03MB   (508/0/0)     512064
> >    1   swap       wu       508 - 2588   1.00GB     (2081/0/0)  2097648
> >    2   backup      wu       0 - 38789    18.64GB    (38790/0/0) 39100320
> >    3   unassigned  wu       0            0          (0/0/0)     0
> >    4   unassigned  wm       0            0          (0/0/0)     0
> >    5   var         wm       2589 - 6750  2.00GB     (4162/0/0)  4195296
> >    6   usr         wm       6751 - 10912 2.00GB     (4162/0/0)  4195296
> >    7   unassigned  wm       0            0          (0/0/0)     0
> > 
> > I can't create a new partion without going into single user mode.
> > 
> > eg.
> > 
> > 7 home 10GB
> > 4 opt  4.9GB
> > 
> > Which I can't do from another state right?
> > 
> > Anyone out there know anyway I can save a air ticket.
> > 
> > Regards
> > --------------------------------------
> > Clayton Winter: Systems Administrator
> > Sun Certified System Administrator
> > Webdata: Corporate Hosting Solutions
> > e: clayton at webdata.com.au p: 4054 1511
> > --------------------------------------