[SunHELP] Solaris 2.8 Install... Not

[Adam Mazza]

Yes, boot from the "1 of 2" CD, and not the "Solaris Installation CD"

Adam Mazza

On Wed, 17 Jan 2001, P Nutton wrote:

> Hi,
>
> I believe if you choose one of the other CDs out of the Solaris 8 install,
> you get the old, simple, non web installation. Can't remember which one,
> though and I was using a Wyse terminal....
> --
> Paul Nutton, SysAdmin, AWE plc
>
> > -----Original Message-----
> > From: Brian Hechinger <wonko at entropy.tmok.com>
> > To: sunhelp at sunhelp.org
> > Date: Tue, 16 Jan 2001 13:07:27 -0500 (EST)
> > Subject: [SunHELP] Solaris 2.8 Install... Not
> > Reply-To: sunhelp at sunhelp.org
> >
> > > I just put a Solaris 2.8 CD in a sparc 20 (128M Ram), and typed boot
> > cdrom
> > > at the ok prompt.  After I see "Solaris Web Start 3.0 installer", the
> > > machine seems to hang.
> >
> > unplug the keyboard.  take out the framebuffer.  attach a serial console.
> > install solaris.  re-attach keyboard and framebuffer, boot -r, and you
> > should be on your way. :)
> >
> > that's a joke, but it's how i do it cause that GUI installation deal
> > annoys
> > the fsck out of me.  either that or use an older unsupported (for console
> > graphics) frambuffer which has the same effect, you just don't need a
> > serial
> > console.
> >
> > > Anyone else install 2.8 on a sparc 20?  Any thoughts on what to check?
> >
> > i installed Solaris 8 on three sparc 20s now.  two with SM71 CPUs (both
> > single
> > and dual-CPU) and one with a Ross HyperSPARC (150Mhz, 512K Ecache) and i
> > didn't
> > have a bit of trouble.  what to check?  not really sure.  could you
> > cut'n'paste
> > the console output? (another good reason to use a serial console)
> >
> > start all the way from the beginning with the bootup banner and
> > everything.
> >
> > cheers,
> >
> > -brian
> >
> --
> _______________________________________________________________________________
>
> The information in this email and in any attachment(s) is commercial in confidence. If you are not the named addressee(s) or if you receive this email in error then any distribution, copying or use of this communication or the information in it is strictly prohibited.  Please notify us immediately by email at intadmin at awe.co.uk, and then delete this message from your computer.  While attachments are virus checked, AWE plc does not accept any liability in respect of any virus which is not detected.
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
>