[Sunhelp] Booting E4500 from D1000s

[Dale Ghent]

Try:

setenv diag-switch? false
reset

If diag-switch is set to true, it'll try to boot from the net, no matter
what boot-file says.

/dale


On Wed, 6 Sep 2000, Brian Canada wrote:

| I'm at a loss here, any help would be appreciated.
| 
| I'm trying to boot off of a D1000s and it continues to try to boot from the network.   Here's what I've got....
| 
| {0} ok probe-scsi-all
| /sbus at 3,0/SUNW,fas at 3,8800000
| Target 6 
|   Unit 0   Removable Read Only device     TOSHIBA XM6201TASUN32XCD110312/12/97
|                                                                                     
| /sbus at 2,0/QLGC,isp at 1,10000
| Target 0 
|   Unit 0   Disk     FUJITSU MAG3091L SUN9.0G11110018456766
| Target 1 
|   Unit 0   Disk     FUJITSU MAG3091L SUN9.0G11110018456699
| Target e 
|   Unit 0   Processor     SYMBIOS D1000           2   N     SAF-TE1.00
| 
| {0} ok show-disks
| a) /sbus at 3,0/SUNW,fas at 3,8800000/sd
| b) /sbus at 2,0/QLGC,isp at 1,10000/sd
| c) /sbus at 2,0/SUNW,socal at d,10000/sf at 1,0/ssd
| d) /sbus at 2,0/SUNW,socal at d,10000/sf at 0,0/ssd
| q) NO SELECTION 
| Enter Selection, q to quit: 
| 
| bootdisk                 /sbus at 2,0/QLGC,isp at 1,10000/sd at 0,0
| disk                     /sbus at 3,0/SUNW,fas at 3,8800000/sd at 0,0
| diskbrd                  /sbus at 3,0/SUNW,fas at 3,8800000/sd at a,0
| diskisp                  /sbus at 3,0/QLGC,isp at 0,10000/sd at 0,0
| net                      /sbus at 3,0/SUNW,hme at 3,8c00000
| cdrom                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 6,0:f
| tape                     /sbus at 3,0/SUNW,fas at 3,8800000/st at 4,0
| scsi                     /sbus at 3,0/SUNW,fas at 3,8800000
| disk0                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 0,0
| disk1                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 1,0
| disk2                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 2,0
| disk3                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 3,0
| disk4                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 4,0
| disk5                    /sbus at 3,0/SUNW,fas at 3,8800000/sd at 5,0
| tape0                    /sbus at 3,0/SUNW,fas at 3,8800000/st at 4,0
| tape1                    /sbus at 3,0/SUNW,fas at 3,8800000/st at 5,0
| ttya                     /central/fhc/zs at 0,902000:a
| ttyb                     /central/fhc/zs at 0,902000:b
| keyboard                 /central/fhc/zs at 0,904000
| keyboard!                /central/fhc/zs at 0,904000:forcemode
| 
| {0} ok printenv boot-device
| boot-device =         bootdisk
| {0} ok 
| 
| 
| 8-slot Sun Enterprise E4500/E5500, No Keyboard
| OpenBoot 3.2.26, 4096 MB memory installed, Serial #15561529.
| Copyright 2000 Sun Microsystems, Inc.  All rights reserved
| Ethernet address 8:0:20:ed:73:39, Host ID: 80ed7339.
| Boot device: net  File and args: 
| Using Onboard Transceiver - Link Up. 
| Timeout waiting for ARP/RARP packet
| Timeout waiting for ARP/RARP packet
| Timeout waiting for ARP/RARP packet
| 
| 
| Thanks
| 
| H. Brian Canada
| Unix Systems Administrator
| Dallas Semiconductor
| _______________________________________________
| SunHELP maillist  -  SunHELP at sunhelp.org
| http://www.sunhelp.org/mailman/listinfo/sunhelp
|