[Sunhelp] PN 501-1931

[Jens Kuenne]

Hi Brian,

here is what the FE-handbook says about the card:


501-1511	SBus Serial Parallel Controller (SPC/S)
501-1931	SBus Serial Parallel Controller (SPC/S)
340-2342	19" Wide Rack Mounting Bracket
340-2361	Wall Mounting Bracket
340-2460	Sun 56" Rack Mounting Bracket 
340-2898	SBus Mounting Screw Adapter Bracket
540-2007	8-Channel Interface Panel
540-1558	RS-232 Loopback Test Plug, 25-Pin
370-1366	SPC/S Loopback Test Plug, 96-Pin High-Density
530-1685	Interface Cable, SBus Card to Interface Panel, 2.0M

Notes

   1.The minimum operating system is SunOS 4.0.3c. 
   2.The 501-1931 is not compatible with SPC/S driver SPC 1.0. 
   3.The 501-1931 is compatible with SPC/S drivers SPC 1.1, 1.2, and
2.x. 
   4.SPC/S driver SPC 2.0 is compatible with Solaris 2.1 and 2.2. 
   5.SPC/S driver SPC 2.0 is not compatible with Solaris >=2.3. 
   6.The SPC/S driver is included in Solaris >=2.3. 
   7.Option 1146 includes SPC 3.0 for Solaris 7 64-Bit operating system. 
   8.The CL-CD180 Rev B is not compatible with Sun4d systems. 
   9.The CL-CD180 Rev B was not tested with Sun4u systems. 


Brian Hechinger wrote:
> 
> i salvaged a bunch of thrown out stuff at work.  one of the items is an SBus
> card with PN 501-1931.  from the quick look i thought it was a HSI/S card since
> it has the same connector.  but doing a search of the PN says it's a serial
> and parallel board.  so what cable (PN would be nice) do i need to use this
> thing?  i found out what it was searching on the internet, but i couldn't get
> much further than that.
> 
> thanks,
> 
> -brian
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp

-- 
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
	Systemhaus SAR GmbH	www.sar.de	jens.kuenne at sar.de
	Arnold-Sommerfeld-Ring 2		+49 2401 9195-0
	52499 Baesweiler			+49 2401 9195-66