[Sunhelp] SUMMARY:Problem adding VRTSvxvm

Jon Ingason sunhelp at sunhelp.org
Thu Nov 9 06:01:09 CST 2000


This is a multi-part message in MIME format.
--------------4BAE8A66F8112FF7A1F91832
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Thanks for all response. The problem is solved with the help of
Sun Support (in Sweden). There are some bug in ipdcm-driver and
patch 107553-01 solved this problem after rebooting of the system.

--Jon

Jon Ingason wrote:
> 
> Hi, I have Sun Ultra Enterprise 220R whith Solaris 7 installed
> and patched with recommended patches fr Solaris 7 from
> SunSolve version 4.0.15.
> 
> When I try to add the packet VRTSvxvm I get following:
> 
> ## Executing postinstall script.
> 
> Copy //kernel/drv/vxio.SunOS_5.7 to //kernel/drv/vxio...
> Copy //kernel/drv/vxspec.SunOS_5.7 to //kernel/drv/vxspec...
> 
> Copy //kernel/drv/sparcv9/vxio.SunOS_5.7 to //kernel/drv/sparcv9/vxio...
> Copy //kernel/drv/sparcv9/vxspec.SunOS_5.7 to
> //kernel/drv/sparcv9/vxspec...
> Copy //sbin/vxconfigd.SunOS_5.7 to //sbin/vxconfigd...
> Copy //kernel/drv/vxdmp.SunOS_5.7 to //kernel/drv/vxdmp...
> Copy //kernel/drv/sparcv9/vxdmp.SunOS_5.7 to
> //kernel/drv/sparcv9/vxdmp...
> 
> Adding vxdmp driver for SunOS version 5.7...
> Warning: Unable to check for driver configuration conflicts.
> Error: Could not install driver (vxdmp).
> Device managed by another driver.
> 
>         Error adding vxdmp driver. Please fix the problem and re-run
> pkgadd.
> pkgadd: ERROR: postinstall script did not complete successfully
> 
> Installation of <VRTSvxvm> failed.
> 
> I understand that "add_drv" is trying to install the vxdmp driver,
> but do not know how to solve this.
> 
> Jon Ingason
> Unix System Administrator



Derrick Daugherty wrote:
> 
> What is your 220 attached to and how is it physically configured?  Have
> you attempted an install of vxvm before but interrupted it or the like?
> 
> modinfo |grep vx
> 
> is dmp already listed?  if so you can  `modunload` it, but I'd remove
> the whole package cleanly if it's not in use yet, then reinstall.
> 
> It's also possible that when you installed rm6, if you did, and
> depending on your configuration, it may have touched the file
> /kernel/drv/ap  which the vxdmp install now belives that alternate
> pathing is installed.
> 
> w/o knowing what your configuration and your end goal is it's hard to
> recommend.
> 
> Another possible issue, is your /tmp a seperate mount point from / ?
> 
> -Derrick
> 
> It's rumored that around Wed, Nov 01, 2000 at 03:20:17PM +0100
> Jon Ingason <Jon.Ingason at GlobalOne.net> wrote:
> > Hi, I have Sun Ultra Enterprise 220R whith Solaris 7 installed
> > and patched with recommended patches fr Solaris 7 from
> > SunSolve version 4.0.15.
> >
> > When I try to add the packet VRTSvxvm I get following:
> >
> > ## Executing postinstall script.
> >
> > Copy //kernel/drv/vxio.SunOS_5.7 to //kernel/drv/vxio...
> > Copy //kernel/drv/vxspec.SunOS_5.7 to //kernel/drv/vxspec...
> >
> > Copy //kernel/drv/sparcv9/vxio.SunOS_5.7 to //kernel/drv/sparcv9/vxio...
> > Copy //kernel/drv/sparcv9/vxspec.SunOS_5.7 to
> > //kernel/drv/sparcv9/vxspec...
> > Copy //sbin/vxconfigd.SunOS_5.7 to //sbin/vxconfigd...
> > Copy //kernel/drv/vxdmp.SunOS_5.7 to //kernel/drv/vxdmp...
> > Copy //kernel/drv/sparcv9/vxdmp.SunOS_5.7 to
> > //kernel/drv/sparcv9/vxdmp...
> >
> > Adding vxdmp driver for SunOS version 5.7...
> > Warning: Unable to check for driver configuration conflicts.
> > Error: Could not install driver (vxdmp).
> > Device managed by another driver.
> >
> >         Error adding vxdmp driver. Please fix the problem and re-run
> > pkgadd.
> > pkgadd: ERROR: postinstall script did not complete successfully
> >
> > Installation of <VRTSvxvm> failed.
> >
> > I understand that "add_drv" is trying to install the vxdmp driver,
> > but do not know how to solve this.
> >
> > Jon Ingason
> > Unix System Administrator
> Content-Description: Card for Jon Ingason
> 
> --
> .   . .................... .. . .. .................... .   .
> :       Derrick Daugherty    .:.      512.381.8952          :
> :                Point One Telecommunications               :
> :   UNIX/Security Administration     derrick at pointone.com   :
> :..............home is where the console is.................:

jhartzen at csc.com wrote:
> 
> I would guess this may be a conflict between Volume Manager and Solstice
> Disk Suite or something similar, though I believe you CAN have them both
> running on the same system - I have never tried this.
> 
>   _Johan
> 
> "Jon Ingason" <Jon.Ingason at GlobalOne.net>@sunmanagers.ececs.uc.edu on
> 01/11/2000 04:20:17 PM
> 
> Sent by:  owner-sun-managers at sunmanagers.ececs.uc.edu
> 
> To:   Sun-Managers <sun-managers at sunmanagers.ececs.uc.edu>
> cc:
> Subject:  Problem adding VRTSvxvm
> 
> Hi, I have Sun Ultra Enterprise 220R whith Solaris 7 installed
> and patched with recommended patches fr Solaris 7 from
> SunSolve version 4.0.15.
> 
> When I try to add the packet VRTSvxvm I get following:
> 
> ## Executing postinstall script.
> 
> Copy //kernel/drv/vxio.SunOS_5.7 to //kernel/drv/vxio...
> Copy //kernel/drv/vxspec.SunOS_5.7 to //kernel/drv/vxspec...
> 
> Copy //kernel/drv/sparcv9/vxio.SunOS_5.7 to //kernel/drv/sparcv9/vxio..


Derrick Daugherty wrote:
> 
> It's rumored that around Thu, Nov 02, 2000 at 11:16:24AM +0100
> Jon Ingason <Jon.Ingason at globalone.net> wrote:
> > The 220R has one intenal disk and one external.
> > This is first time installation of VRTSvxvm or Veritas volume manager.
> 
> Hmm, sounds like you don't need vxdmp at all.  DMP is dynamic
> multipathing, lets you load balance across multiple controllers and if
> one fails it will fail over.  That's assuming you're mirroring across
> the controllers.  On the 220's I generally put two drives internally and
> mirror those as the root drives and then put hte apps and databases out
> on a d1000 or a1000.  Is the internal and external to be mirrors of each
> other?  I assume `format` sees the external drive?  Unless you're
> mirroring between the two dmp won't be needed.
> 
> > Thert is no /kernel/drv/ap and /tmp is mounted to swap as tmpfs.
> 
> Yeah, that would be if you've installed Raid Manager for an A1000 or
> A3500.
> 
> > The problem occur in the postinstall script for packet VRTSvxvm,
> > when it try to execute following instruction:
> >
> > add_drv -m '* 0640 root sys' /kernel/drv/sparcv9/vxdmp
> 
> you can try that command yourself and it should print an error.
> 
> > This fails and the rest of postinstallation is skiped.
> 
> Aaah, so even if you don't need it, you still need the rest of the
> postinstall script to complete.  I assume you pkgrm before pkgadd'ing
> again?
> 
> Trying the add_drv and getting the error will let you know.  Also, the
> output of truss would be extremely helpfull.
> truss -o dmpfail /usr/sbin/add_drv -m '* 0640 root sys' /kernel/drv/sparcv9/vxdmp
> 
> 'dmpfail' will hold all the output
> 
> -Derrick
> 
> > Jon Ingason
> >
> > Derrick Daugherty wrote:
> > >
> > > What is your 220 attached to and how is it physically configured?  Have
> > > you attempted an install of vxvm before but interrupted it or the like?
> > >
> > > modinfo |grep vx
> > >
> > > is dmp already listed?  if so you can  `modunload` it, but I'd remove
> > > the whole package cleanly if it's not in use yet, then reinstall.
> > >
> > > It's also possible that when you installed rm6, if you did, and
> > > depending on your configuration, it may have touched the file
> > > /kernel/drv/ap  which the vxdmp install now belives that alternate
> > > pathing is installed.
> > >
> > > w/o knowing what your configuration and your end goal is it's hard to
> > > recommend.
> > >
> > > Another possible issue, is your /tmp a seperate mount point from / ?
> > >
> > > -Derrick
> > >
> > > It's rumored that around Wed, Nov 01, 2000 at 03:20:17PM +0100
> > > Jon Ingason <Jon.Ingason at GlobalOne.net> wrote:
> > > > Hi, I have Sun Ultra Enterprise 220R whith Solaris 7 installed
> > > > and patched with recommended patches fr Solaris 7 from
> > > > SunSolve version 4.0.15.
> > > >
> > > > When I try to add the packet VRTSvxvm I get following:
> > > >
> > > > ## Executing postinstall script.
> > > >
> > > > Copy //kernel/drv/vxio.SunOS_5.7 to //kernel/drv/vxio...
> > > > Copy //kernel/drv/vxspec.SunOS_5.7 to //kernel/drv/vxspec...
> > > >
> > > > Copy //kernel/drv/sparcv9/vxio.SunOS_5.7 to //kernel/drv/sparcv9/vxio...
> > > > Copy //kernel/drv/sparcv9/vxspec.SunOS_5.7 to
> > > > //kernel/drv/sparcv9/vxspec...
> > > > Copy //sbin/vxconfigd.SunOS_5.7 to //sbin/vxconfigd...
> > > > Copy //kernel/drv/vxdmp.SunOS_5.7 to //kernel/drv/vxdmp...
> > > > Copy //kernel/drv/sparcv9/vxdmp.SunOS_5.7 to
> > > > //kernel/drv/sparcv9/vxdmp...
> > > >
> > > > Adding vxdmp driver for SunOS version 5.7...
> > > > Warning: Unable to check for driver configuration conflicts.
> > > > Error: Could not install driver (vxdmp).
> > > > Device managed by another driver.
> > > >
> > > >         Error adding vxdmp driver. Please fix the problem and re-run
> > > > pkgadd.
> > > > pkgadd: ERROR: postinstall script did not complete successfully
> > > >
> > > > Installation of <VRTSvxvm> failed.
> > > >
> > > > I understand that "add_drv" is trying to install the vxdmp driver,
> > > > but do not know how to solve this.
> > > >
> > > > Jon Ingason
> > > > Unix System Administrator
> > > Content-Description: Card for Jon Ingason
> > >
> > > --
> > > .   . .................... .. . .. .................... .   .
> > > :       Derrick Daugherty    .:.      512.381.8952          :
> > > :                Point One Telecommunications               :
> > > :   UNIX/Security Administration     derrick at pointone.com   :
> > > :..............home is where the console is.................:
> Content-Description: Card for Jon Ingason
> 
> --
> .   . .................... .. . .. .................... .   .
> :       Derrick Daugherty    .:.      512.381.8952          :
> :                Point One Telecommunications               :
> :   UNIX/Security Administration     derrick at pointone.com   :
> :..............home is where the console is.................:
--------------4BAE8A66F8112FF7A1F91832
Content-Type: text/x-vcard; charset=us-ascii;
 name="Jon.Ingason.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Jon Ingason
Content-Disposition: attachment;
 filename="Jon.Ingason.vcf"

begin:vcard 
n:Ingason;Jon
tel;cell:+46-70-891 3316
tel;fax:+46-8-5191 3200
tel;work:+46-8-5191 3316
x-mozilla-html:FALSE
adr:;;;;;;
version:2.1
email;internet:Jon.Ingason at globalone.net
fn:Jon Ingason
end:vcard

--------------4BAE8A66F8112FF7A1F91832--




More information about the SunHELP mailing list