[Sunhelp] SCSI
Keith Ketchmark
ketchmarkkeith at uswest.net
Thu May 18 07:34:29 CDT 2000
All
I have also had this happen. I had to remove the disk's from the opt 8-bay
expansion. Then press the disk's in while
pressing in on the back plane. (with the side cover removed, pressing in next to
the slot of the disk)
But the drives seem to work loose after about 3-4 day's. I can't fig this out. I
have installed this configuration in older e450 with no problem.
Thanks Keith Ketchmark
Xavier Mertens wrote:
> Hi all,
>
> Any idea about these messages?
> They appeated after adding a 8-bay extension card in E450.
> (Solaris 2.6, latest cluster patch)
>
> WARNING: /pci at 6,4000/scsi at 4 (glm2):
> Connected command timeout for Target 4.0
> WARNING: /pci at 6,4000/scsi at 4 (glm2):
> Target 4 reducing sync. transfer rate
> WARNING: /pci at 6,4000/scsi at 4 (glm2):
> Connected command timeout for Target 5.0
> WARNING: /pci at 6,4000/scsi at 4 (glm2):
> Target 5 reducing sync. transfer rate
> WARNING: /pci at 6,4000/scsi at 4 (glm2):
> Connected command timeout for Target 6.0
> WARNING: /pci at 6,4000/scsi at 4 (glm2):
> Target 6 reducing sync. transfer rate
>
> --
> Xavier Mertens, . . EuroNet Internet "Contrary to popular belief,
> NOC Manager . * a subsidiary of Unix is userfriendly. It
> XM3-RIPE XM1-6BONE . France Telecom just happens to be selective
> about who it makes friends
> with."
>
> _______________________________________________
> SunHELP maillist - SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Keith Ketchmark
Sr. Systems Analyst
NCell Systems
3456 Victoria St. N
Shoreview, MN 55126 USA
Voice: 651.765.8007
Facsimile: 651.765.8009
Email: ketchmarkkeith at uswest.net
Web Page: http://www.ncell.com
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
More information about the SunHELP
mailing list