[Sunhelp] Problem with sparc 10 video

[David Beaudoin]

Thanks, Bill...it did turn out to be a bad keyboard.

> On Wed, Jun 07, 2000 at 07:09:22PM -0400, David Beaudoin wrote:
> > I have a sparc 10 running 2.5.1 which has stopped sending output to the
monitor.
> > The power to the monitor is on (green LED), but the screen remains blank
(even
> > after a reboot). I have verified the monitor is good and I have also tried
using
> > a different slot for the video card (SunGX), as well as a different known
good
> > video card (TurboxGX). Same result. The machine boots fine (I can telnet in
from
> > the network) and there are no errors in /var/adm/messages or syslog. Any
ideas?
> > Thanks,
> > Dave
>
> Make sure the keyboard is plugged in snugly when you boot.  You should
> get some screen display REGARDLESS ("Sending output to ttya" or similar),
> but check that anyway.
>
> Bill
>
> --
> +--------------------+-------------------+
> |   Bill Bradford    |   Austin, Texas   |
> +--------------------+-------------------+
> | mrbill at sunhelp.org | mrbill at mrbill.net |
> +--------------------+-------------------+
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp