[Sunhelp] Two IP Numbers

[Tim Perricelli]

I pulled the info below from http://www.ebsinc.com/solaris/faq.html have a
good one.

TP

With Solaris 2.x it is possible to configure multiple IP addresses for a
single physical interface. This allows a machine with a single ethernet card
to appear as an entire network of different machines. 

In order to configure the lance ethernet (le0 or hme0) device to support
more
than one ip address, do the following:

1.  Create entries in /etc/hosts for each hostname your physical machine
    will appear as. 

 128.195.10.31  myhost
 128.195.10.46  myhost2
 128.195.10.78  myhost3
		
2.  Create /etc/hostname.le0:n files that contain the hostname for the
    virtual host n.  Note that hostname.le0:0 is the same as hostname.le0
			
 /etc/hostname.le0   (Contains name myhost)
 /etc/hostname.le0:1 (Contains name myhost2)
 /etc/hostname.le0:2 (Contains name myhost3)

 or

 /etc/hostname.hme0    --> 10/100Mbit/sec high speed interface
 /etc/hostname.hme0:1
 /etc/hostname.hme0:2

The above changes will cause the virtual hosts to be configured at boot
time. 

You can also directly enable/modify a logical hosts configuration by
running ifconfig directly on one of the logical hosts by using the le0:n
naming scheme. 

 % ifconfig le0:1 up
 % ifconfig le0:1 129.153.76.72
 % ifconfig le0:1 down

 or

 % ifconfig hme0:1 up
 % ifconfig hme0:1 129.153.76.72
 % ifconfig hme0:1 down





-----Original Message-----
From: John Nicholes [mailto:john_nicholes at byu.edu]
Sent: Monday, July 10, 2000 2:30 PM
To: sunhelp at sunhelp.org
Subject: [Sunhelp] Two IP Numbers


I'm a bit of a new comer to UNIX and I don't know how to set up my
Enterprise 250 server to have 2 IP addresses for one network card.

Any help would be appreciated.

Thanks

-- John Nicholes
Brigham Young University
HHP Systems Admin
112 Richards Building
Provo UT, 84602
801-378-4443



_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp