[Sunhelp] A5200

[John Robertson]

Hi
You need to use the luxadm utility to get the disks
populated into your dev directory.

The procedure runs something like this from memory
(but check the man page)

disconnect the fibre cable to the system.
Run luxadm install_device
when the system asks plug in fibre cable then hit return.
After a few minutes you should see the devices whiz by
and your there...

If you are using volume manager you need to run vxctl to
get the disks recognised by Vm....
Again as always have a look at the man page first.
Hope this helps
Regards
John

----- Original Message -----
From: Beatriz Elena Durn Castaeda <nexurina at yahoo.com>
To: <sunhelp at sunhelp.org>
Sent: Sunday, August 20, 2000 12:37 AM
Subject: [Sunhelp] A5200


Im installing a A5200, in OK promt I can
see the controller target, but when I get in the
OS the links of the disks in /dev/dsk don't appear
there.

I have trayed boot -r and touch /reconfigure , but I
don't know why I can't make it to detect the disks.

A clue?

__________________________________________________
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp