[Sunhelp] Fw: [Sunhelp] How to test a 13w3 to HD15 cable?

[Mahesh Babbar]

Gregory,

Pls. try this. I have yet to test it.


15 PIN VGA ( FEMALE)                        13w3 ( MALE)

1         <-----------------------------------------------> A1 ( Signal  -
Inside the hole of the connector pin)

2        <------------------------------------------------> A2 ( Signal -
Inside the hole of the connector pin)

3        <------------------------------------------------> A3 ( Signal  -
Inside hole of the connector pin)

4,5    <----------------------------------------------->  2,10

6       <----------------------------------------------->  A1 ( GND -
Outside the hole of the connector pin))

7       <------------------------------------------------> A2 ( GND -
Outside the hole of the connector pin))

8       <------------------------------------------------> A3 ( GND -
Outside the hole of the connector pin))

10 --- 15 ( On 15 Pin VGA Side)

13     <---------------------------------------------------> 5

Body Ground <----------------------------------------> Body Ground

Rest all pins are open.

Try and do give me the feedback.

Regards

Mahesh


-----Original Message-----
From: Gregory Leblanc <nova!cu-portland.edu!GLeblanc>
To: Sun Help List (E-mail) <sunhelp at sunhelp.org>
Date: Monday, May 31, 1999 11:04 AM
Subject: [Sunhelp] How to test a 13w3 to HD15 cable?


>I have a 13w3 to hd15(standard PC monitor) cable that I'm trying to use to
>hook up my SS330 to a pc multi sync monitor.  From poking around on the
web,
>it looks like I need to have the sync signals combined together in order to
>make it work.  Does anybody have the first clue how I might go about
testing
>to see if my cable is wired this way?  I've got a multimeter that I can
use,
>I just don't know where to look for the 13w3 <-> hd15 pinouts.  Thanks,
> Greg
>
>_______________________________________________
>SunHELP maillist  -  SunHELP at sunhelp.org
>http://www.sunhelp.org/mailman/listinfo/sunhelp
>
>