[Sunhelp] ptys

[Duffin, Keith (CAP, GEFA)]

What happened to your system file?  Someone change the default path? (try a
find...)

Try the following: 

Use adb to check what the value is in the running kernel. Must be logged in
as root.

Type: adb -k -w /dev/ksyms /dev/mem

physmem f8a6

Type: pt_cnt/D

pt_cnt:
pt_cnt:         48

Type: $q <==exit out of adb

Now you know what the value is set to.
Keith Duffin
UNIX SA/DBA/C etc...
ORA Consultants/GE Financial Services			
Tel:  (804)782-2744

-----Original Message-----
From: McIntire, John [mailto:john_mcintire at unitrode.com]
Sent: Tuesday, June 08, 1999 8:49 AM
To: 'sunhelp at sunhelp.org'
Subject: RE: [Sunhelp] ptys


I saw that in FAQ but when I went to check it I had no system file within
/etc, so that is why I ask, any ideas where this is set?

> -----Original Message-----
> From:	Duffin, Keith (CAP, GEFA) [SMTP:Keith.Duffin at gecapital.com]
> Sent:	Tuesday, June 08, 1999 8:30 AM
> To:	sunhelp at sunhelp.org
> Subject:	RE: [Sunhelp] ptys
> 
> Take a look at your /etc/system file.  If no entry exists, you have 48.
>  
> FAQ exerpt:
>  
>     Edit /etc/system and add the following line:
>  
>         * System V pseudo terminals
>  
>         set pt_cnt = <num>
>  
>     Halt the system and boot -r.
>  
>     You can essentially have as many as you like, but you'll probably
> run into some other limit somewhere.  More than 3000 are supported.
> Solaris 2.6 and earlier have telnet/rlogin daemons that do not     support
> more than 3844 sessions each.  That restriction is lifted     in Solaris
> 7.
>  
>     Some die-hard system administrator myths as well as some Sun
> documentation claim that you have to increased "sad_cnt", "sadcnt"     or
> "nautopush" when adding ptys.  There is no truth in this. 
>  
>     In the unlikely event that you run out of BSD-style ptys,
>     you can increase them as well.  The maximum here is currently     176
> for pty[p-z][0-9a-f].  This is somewhat less that the BSD     maximum of
> 256
> limited by 8 bit device minor numbers.
>  
>     BSD ttys are awkward to use and all programs I found support SYSV
> ptys without trouble.
>  
>         * You don't need this.  Increasing this value too much usually
> * just wastes memory.
>         * BSD applications never support more than 256 ptys.
>         * Solaris 2.x supports no more than 176 BSD ptys.
>  
>         set npty = <num>
>  
>     But you're not there yet, you also need to edit /etc/iu.ap and
> substitute the new value of "npty-1" for the "47" on the following
> line,
> in case you do increase the number of BSD style ptys.
>  
>                 ptsl    0      47      ldterm ttcompat
>  
>  
>     Halt the system and boot -r.
>  
>     --- end of excerpt from the FAQ
> 
> Keith Duffin
> UNIX SA/DBA/C etc...
> ORA Consultants/GE Financial Services			
> Tel:  (804)782-2744
> 
> 
> -----Original Message-----
> From: McIntire, John [mailto:john_mcintire at unitrode.com]
> Sent: Tuesday, June 08, 1999 7:57 AM
> To: 'Sun Help'
> Subject: [Sunhelp] ptys
> 
> 
> I got system on SunOS 4.1.4 2 sun4m which is running out of ptys. Being
> still new to Sun how do you tell what it is set for and what is the max it
> can be set for?  
> 
> Thanks in advance
> 
> John McIntire
> Senior Systems Analyst
> Unitrode Corporation
> 7 Continental Blvd	
> Merrimack, NH 03054			
> Tel:  (603)429-6227
> Fax: (603)429-6085
> 
> 
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp

_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp