[SPARCbook] dumb case question

[2711]

Ive used plumbers solder to repair the magnesium lid to the controls on my
bass amp, and it hasn't broken in four months of frequent use, But i'd wager
five ton clear epoxy worked into the crack would would work best, but it would
be ugly.

Jonathan Kalbfeld wrote:

> I couldn't find anything in the FAQ about this one so I figured I'd ask.
>
> I've got a crack developing in my sparcbook 3gs case that is exacerbated
> every time I open it.
>
> It's specifically on the right arm which connects the display top to the
> bottom, on the part where it goes from rounded to flat.  There's a crack
> right on the cusp there.
>
> If that part is severed, will it affect the sturdiness of the case, and is
> there any way to reinforce/tighten this to prevent the display from
> flopping down and making the operator very upset.  I tried crazy glue but
> it doesn't stick and only makes it worse.
>
> jonathan
>
> :wq!
>
> _______________________________________________
> Sparcbook mailing list  -  Sparcbook at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sparcbook