[rescue] On The Hunt: SBUS Transputer Link Card

Dave McGuire mcguire at neurotica.com
Thu Dec 3 17:58:24 CST 2015


  Ok, that's *exactly* within the focus of the Large Scale Systems
Museum.  If it's available, I'll definitely head up there to pick it up.

              -Dave

On 12/03/2015 06:43 PM, Bob Krzaczek wrote:
> Back in July of 2010, I posted here to unload a Parsytec cluster that
> was saved from the recycler.  I think it was Ian Finder that found it
> prohibitively expensive to ship cross country, but maybe someone else
> is closer?  It's pretty nontrivial...
> 
> Digging through this, I found an off-list email from Damien Carlier
> from earlier this year.  Damien, if you're still out there, I
> apologize so much for letting that thread go silent.  Please reply to
> this thread if you're at all interested!  Richard, Dave, I think
> Damien should get first dibs, and then you two can rumble.
> 
> I ***really*** don't want to part this out, little by little; I'd
> rather see it go intact to a good home... or at least in big chunks.
> I know you two are only interested in the SBUS link card, but if you
> or anyone else on the Rescue list would take more, I'd really
> appreciate it.
> 
> The decription is copied below.  All but the Exabyte is still around,
> I believe.  They loved themselves some 8mm when they were using this
> gear.
> 
>     Having been the recipient of some recent good will, I'm going to
>     try and keep this ball rolling.  "Paying it forward," if you will.
> 
>     36 node Parsytec parallel computer, in three MC-3 cabinets.  Each
>     cabinet weighs somewhere around 65 lbs, and is about 9-1/2" high,
>     22" wide, and 23-1/2" deep.  They stack, of course.
> 
>     Each MC-3 contains 12 TPM-MPC processor boards.  Each board has a
>     T805 Transputer, a PPC 604, and 32 MB local RAM.  There's a spare
>     (37th) board, too.
> 
>     All the manuals, all the cabling.  Software, too, and I'll throw
>     in the Exabyte 8mm tape drive that the software is on.
> 
>     These were the systems with the programmable backplanes.  You
>     could arrange your processors in a star, a cube, daisy chain, etc.
>     Pretty cool.  Heck, I'll even fish around and dig up the Axil
>     (SPARCstation 5 clone) system that front-ended it, if you want.
>     :-)
> 
>     Come on, you know you want to... *laugh*
> 
>     Bob
> 
> I might be able to still dig up an/the Exabyte drive, but I'm nearly
> certain that everything else offered there is still intact.
> 
> The zipcode here is 14623.
> 
> Cheers,
> Bob
> 
> 
> --
> Bob Krzaczek, Chester F. Carlson Center for Imaging Science, RIT
> phone +1-585-4757196, email krz at cis.rit.edu, icbm 43.08586N 77.67744W
> 
> [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> 


-- 
Dave McGuire, AK4HZ
New Kensington, PA


More information about the rescue mailing list