[rescue] Sparc Server 1000E

[Jonathan Sturges]

>Date: Wed, 10 Dec 2014 13:18:26 +0100
>From: supervinx <supervinx at libero.it>
>To: The Rescue List <rescue at sunhelp.org>
>Subject: Re: [rescue] Sparc Server 1000E
>Message-ID: <1418213906.2585.4.camel at PIV-Ubuntu>
>Content-Type: text/plain; charset="UTF-8"
>
>I suspect that messed up the ram.
>The first cpu module is full populated.
>The second half populated.
>The third and the fourth modules are empty.
>
>Should I redistribute the ram through the modules?
>I.E.: 
>1) fill bank 0 of all modules, starting from #0
>2) fill bank 1 of all modules, starting from #0
>if ram it's not enough, fill the low numbered modules first.
>


In the vein of "better late than never," here are the SS1000E memory rules:

1)  Minimum memory configuration is 4 SIMMs in Group 0.
2)  Use 8MB SIMMs 501-1817 and 32MB SIMMs 501-2196.
3)  Install all Group 0 SIMMs on all system boards first, beginning with the lowest board slot number.  Then populate Group 1 in the same order, followed by Groups 2  & 3.

It says there may be more information in the Memory Module Installation Guide, 801-2030-12.

-Jonathan