[rescue] Cisco 2924 rescue question...

[fugi]

In message <1131551917.1445.7.camel at localhost>, you write:
> I finally have the proper "rollover" cable for use with Cisco console ports!
> 
> So the next thing to do was to plug it into one of the rescued Cisco 2924 switches I have...
> 
> apparently the boot loader is there, but an image (boot image) is not in flash.
> 
> Going to Cisco's site, it seems that you have to buy a contract in order to get an image? 
> 
> Is it just my imagination or did I use to see a "special", non-CCO image for the 1900 and 2900 series switches on the Cisco site?  (I have a 2924M-XL-EN ).
> 
> --Patrick
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> 

-rw-rw-rw-  1 tftp  wheel  1257472 Oct  7  2004 c2900XL-c3h2s-mz-120.5.2-XU.bin
-rw-rw-rw-  1 tftp  wheel   105970 Oct  7  2004 c2900XL-diag-mz-120.5.2-XU
-rw-rw-rw-  1 tftp  tftp   1109398 Jul 21  2003 c2900XL-h2-mz-112.8.2-SA6.bin
-rw-rw-rw-  1 tftp  tftp   1119215 Jul 22  2003 c2900XL-hs-mz-112.8.11-SA6.bin
-rw-rw-rw-  1 tftp  wheel  2664051 Oct  6  2004 c2950-i6q4l2-mz.121-11.EA1.bin
-rw-rw-rw-  1 tftp  wheel  2888826 Oct  6  2004 c2950-i6q4l2-mz.121-13.EA1b.bin

in case you can't find what you're looking for, I think the SA6
one fixed the latest DoS.